Hello, I just updated the drivers so we will see what happens in the next day or so. These are updated logs from dmesg from earlier today before I updated the driver. The problem seems to go away after a reboot of the box.
[83918.291077] ixgbe 0000:01:00.0 eth1: Fake Tx hang detected with timeout of 80 seconds [83998.415598] ixgbe 0000:01:00.0 eth1: Fake Tx hang detected with timeout of 80 seconds [84078.284118] ixgbe 0000:01:00.0 eth1: Fake Tx hang detected with timeout of 80 seconds [84158.408635] ixgbe 0000:01:00.0 eth1: Fake Tx hang detected with timeout of 80 seconds [84238.277158] ixgbe 0000:01:00.0 eth1: Fake Tx hang detected with timeout of 80 seconds [84318.401676] ixgbe 0000:01:00.0 eth1: Fake Tx hang detected with timeout of 80 seconds [84398.270197] ixgbe 0000:01:00.0 eth1: Fake Tx hang detected with timeout of 80 seconds [84478.394715] ixgbe 0000:01:00.0 eth1: Fake Tx hang detected with timeout of 80 seconds [84558.263238] ixgbe 0000:01:00.0 eth1: Fake Tx hang detected with timeout of 80 seconds [84638.387756] ixgbe 0000:01:00.0 eth1: Fake Tx hang detected with timeout of 80 seconds [84718.256281] ixgbe 0000:01:00.0 eth1: Fake Tx hang detected with timeout of 80 seconds [84798.380811] ixgbe 0000:01:00.0 eth1: Reset adapter [84798.462267] [PF_RING] Unloading ZC driver while the device is in use from userspace!! [84798.462270] [PF_RING] Unloading ZC driver while the device is in use from userspace!! [84798.652772] ixgbe 0000:01:00.0 eth1: detected SFP+: 5 [84798.888783] ixgbe 0000:01:00.0 eth1: NIC Link is Up 10 Gbps, Flow Control: RX At this in point if I stop the app, it will still not send traffic outbound. dmesg also will print this: [88298.496623] [PF_RING] pfring_release_zc_dev:6493 something got wrong removing socket bound to eth1@0 [88298.600622] [PF_RING] pfring_release_zc_dev:6493 something got wrong removing socket bound to eth1@0 [88298.808612] [PF_RING] pfring_release_zc_dev:6493 something got wrong removing socket bound to eth1@1 [88298.912613] [PF_RING] pfring_release_zc_dev:6493 something got wrong removing socket bound to eth1@1 I will check back in 24 hours to see if the problem reoccurs. Thanks On Wed, Jun 15, 2016 at 9:34 AM, Alfredo Cardigliano <[email protected]> wrote: > Hi Josiah > there is a fix for this on github (new packages will be availabel soon) > > Alfredo > > > On 15 Jun 2016, at 03:46, Josiah White <[email protected]> > wrote: > > > > Hello, > > > > I recently switched from the DNA drivers to the latest drivers on the > git. The software seems to be working fine with one exception that after > 12-24 hours it stops sending out traffic. When this happens dmesg is filled > with errors saying "ixgbe 0000:01:00.0 eth1: Fake Tx hang detected with > timeout of 80 seconds". > > I am using it on two interfaces and both interfaces are saying this. > > > > Thanks > > _______________________________________________ > > Ntop-misc mailing list > > [email protected] > > http://listgateway.unipi.it/mailman/listinfo/ntop-misc > > > _______________________________________________ > Ntop-misc mailing list > [email protected] > http://listgateway.unipi.it/mailman/listinfo/ntop-misc >
_______________________________________________ Ntop-misc mailing list [email protected] http://listgateway.unipi.it/mailman/listinfo/ntop-misc
