Do you mean that you have some external program (written in C++) that you want to communicate with a NOX component (written in Python)?
jsonmessenger works by sending and receiving JSON (http://json.org) messages. So on the NOX side, you use jsonmessenger. In the external program, you can use any of several libraries for doing JSON encoding/decoding. -- Murphy On Dec 20, 2011, at 1:09 AM, Harshil Anil Kumar Shah wrote: > Hi, > In my case where external module is C++ then can I use “pyobject” to interact > with python module? > > From: Harshil Anil Kumar Shah > Sent: Monday, December 19, 2011 3:32 PM > To: 'Kyriakos Zarifis' > Cc: nox-dev@noxrepo.org > Subject: RE: [nox-dev] Nox messenger example for external c++ and nox python > > Thanks Zarifis… > > I looked at GUI example. It seems very useful. But in my case, client is > external C++ module. So in that case do I have to use use messenger.cpp?? > > -Harshil. > > From: nox-dev-boun...@noxrepo.org [mailto:nox-dev-boun...@noxrepo.org] On > Behalf Of Kyriakos Zarifis > Sent: Monday, December 19, 2011 1:38 PM > To: Harshil Anil Kumar Shah > Cc: nox-dev@noxrepo.org > Subject: Re: [nox-dev] Nox messenger example for external c++ and nox python > > Hi Harshil, > > it might not be the simplest example, but the GUI communicates with NOX using > the messenger, so taking a look at that code might be a good starting point. > > Specifically, the file communication.py is responsible on the GUI side. > Similarly on the NOX side, the code that uses the messenger to send messages > to the GUI is inside the respective component that talks to the GUI. The > component "monitoring" is one of them. > > Some of this is documented on the wiki here: > http://noxrepo.org/noxwiki/index.php/NOX_GUI#Connecting_a_subview_to_a_NOX_component > > On Sun, Dec 18, 2011 at 10:41 PM, Harshil Anil Kumar Shah > <harshil_s...@infosys.com> wrote: > Hi, > > I want to exchange messages between external C++ module and python module in > Nox using protobuf messages. I browsed through couple of posts, I figured out > I can use coreapps/messenger. Can I get some working example how messenger > code can be used for message exchange between external c++ and nox python > module. > > Regards, > Harshil Shah, > Convergence Lab, Infosys Labs > Infosys | Bangalore > Mob # : +91 97428 87966. > > **************** CAUTION - Disclaimer ***************** > This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely > for the use of the addressee(s). If you are not the intended recipient, > please > notify the sender by e-mail and delete the original message. Further, you are > not > to copy, disclose, or distribute this e-mail or its contents to any other > person and > any such actions are unlawful. This e-mail may contain viruses. Infosys has > taken > every reasonable precaution to minimize this risk, but is not liable for any > damage > you may sustain as a result of any virus in this e-mail. You should carry out > your > own virus checks before opening the e-mail or attachment. Infosys reserves > the > right to monitor and review the content of all messages sent to or from this > e-mail > address. Messages sent to or from this e-mail address may be stored on the > Infosys e-mail system. > ***INFOSYS******** End of Disclaimer ********INFOSYS*** > > _______________________________________________ > nox-dev mailing list > nox-dev@noxrepo.org > http://noxrepo.org/mailman/listinfo/nox-dev > > > _______________________________________________ > nox-dev mailing list > nox-dev@noxrepo.org > http://noxrepo.org/mailman/listinfo/nox-dev
_______________________________________________ nox-dev mailing list nox-dev@noxrepo.org http://noxrepo.org/mailman/listinfo/nox-dev
