Hi,
On 11/03/2025 17:47, Thomas Zimmermann wrote:
> Add drm_modes_size_dumb(), a helper to calculate the dumb-buffer
> scanline pitch and allocation size. Implementations of struct
> drm_driver.dumb_create can call the new helper for their size
> computations.
>
> There is currently quite a bit of code duplication among DRM's
> memory managers. Each calculates scanline pitch and buffer size
> from the given arguments, but the implementations are inconsistent
> in how they treat alignment and format support. Later patches will
> unify this code on top of drm_mode_size_dumb() as much as possible.
>
> drm_mode_size_dumb() uses existing 4CC format helpers to interpret
> the given color mode. This makes the dumb-buffer interface behave
> similar the kernel's video= parameter. Current per-driver implementations
> again likely have subtle differences or bugs in how they support color
> modes.
>
> The dumb-buffer UAPI is only specified for known color modes. These
> values describe linear, single-plane RGB color formats or legacy index
> formats. Other values should not be specified. But some user space
> still does. So for unknown color modes, there are a number of known
> exceptions for which drm_mode_size_dumb() calculates the pitch from
> the bpp value, as before. All other values work the same but print
> an error.
>
> v4:
> - use %u conversion specifier (Geert)
> - list DRM_FORMAT_Dn in UAPI docs (Geert)
> - avoid dmesg spamming with drm_warn_once() (Sima)
> - add more information about bpp special case (Sima)
> - clarify parameters for hardware alignment
> - add a TODO item for DUMB_CREATE2
> v3:
> - document the UAPI semantics
> - compute scanline pitch from for unknown color modes (Andy, Tomi)
>
> Signed-off-by: Thomas Zimmermann <tzimmerm...@suse.de>
> ---
> Documentation/gpu/todo.rst | 28 ++++++
> drivers/gpu/drm/drm_dumb_buffers.c | 132 +++++++++++++++++++++++++++++
> include/drm/drm_dumb_buffers.h | 14 +++
> include/uapi/drm/drm_mode.h | 50 ++++++++++-
> 4 files changed, 223 insertions(+), 1 deletion(-)
> create mode 100644 include/drm/drm_dumb_buffers.h
>
> diff --git a/Documentation/gpu/todo.rst b/Documentation/gpu/todo.rst
> index c57777a24e03..f1bd741b06dc 100644
> --- a/Documentation/gpu/todo.rst
> +++ b/Documentation/gpu/todo.rst
> @@ -515,6 +515,34 @@ Contact: Douglas Anderson <diand...@chromium.org>
>
> Level: Starter
>
> +Implement a new DUMB_CREATE2 ioctl
> +----------------------------------
> +
> +The current DUMB_CREATE ioctl is not well defined. Instead of a pixel and
> +framebuffer format, it only accepts a color mode of vague semantics. Assuming
> +a linear framebuffer, the color mode gives and idea of the supported pixel
> +format. But userspace effectively has to guess the correct values. It really
> +only works reliable with framebuffers in XRGB8888. Userspace has begun to
> +workaround these limitations by computing arbitrary format's buffer sizes and
> +calculating their sizes in terms of XRGB8888 pixels.
> +
> +One possible solution is a new ioctl DUMB_CREATE2. It should accept a DRM
> +format and a format modifier to resolve the color mode's ambiguity. As
> +framebuffers can be multi-planar, the new ioctl has to return the buffer
> size,
> +pitch and GEM handle for each individual color plane.
> +
> +In the first step, the new ioctl can be limited to the current features of
> +the existing DUMB_CREATE. Individual drivers can then be extended to support
> +multi-planar formats. Rockchip might require this and would be a good
> candidate.
> +
> +In addition to the kernel implementation, there must be user-space support
> +for the new ioctl. There's code in Mesa that might be able to use the new
> +call.
> +
> +Contact: Thomas Zimmermann <tzimmerm...@suse.de>
> +
> +Level: Advanced
> +
>
> Core refactorings
> =================
> diff --git a/drivers/gpu/drm/drm_dumb_buffers.c
> b/drivers/gpu/drm/drm_dumb_buffers.c
> index 9916aaf5b3f2..97cd3dcb79f1 100644
> --- a/drivers/gpu/drm/drm_dumb_buffers.c
> +++ b/drivers/gpu/drm/drm_dumb_buffers.c
> @@ -25,6 +25,8 @@
>
> #include <drm/drm_device.h>
> #include <drm/drm_drv.h>
> +#include <drm/drm_dumb_buffers.h>
> +#include <drm/drm_fourcc.h>
> #include <drm/drm_gem.h>
> #include <drm/drm_mode.h>
>
> @@ -57,6 +59,136 @@
> * a hardware-specific ioctl to allocate suitable buffer objects.
> */
>
> +static int drm_mode_align_dumb(struct drm_mode_create_dumb *args,
> + unsigned long hw_pitch_align,
> + unsigned long hw_size_align)
> +{
> + u32 pitch = args->pitch;
> + u32 size;
> +
> + if (!pitch)
> + return -EINVAL;
> +
> + if (hw_pitch_align)
> + pitch = roundup(pitch, hw_pitch_align);
> +
> + /* overflow checks for 32bit size calculations */
> + if (args->height > U32_MAX / pitch)
> + return -EINVAL;
> +
check_mul_overflow(args->height, pitch, &size)?
> + if (!hw_size_align)
> + hw_size_align = PAGE_SIZE;
> + else if (!IS_ALIGNED(hw_size_align, PAGE_SIZE))
> + return -EINVAL; /* TODO: handle this if necessary */
> +
> + size = ALIGN(args->height * pitch, hw_size_align);
> + if (!size)
> + return -EINVAL;
> +
> + args->pitch = pitch;
> + args->size = size;
> +
> + return 0;
> +}
> +
> +/**
> + * drm_mode_size_dumb - Calculates the scanline and buffer sizes for dumb
> buffers
> + * @dev: DRM device
> + * @args: Parameters for the dumb buffer
> + * @hw_pitch_align: Hardware scanline alignment in bytes
> + * @hw_size_align: Hardware buffer-size alignment in bytes
> + *
> + * The helper drm_mode_size_dumb() calculates the size of the buffer
> + * allocation and the scanline size for a dumb buffer. Callers have to
> + * set the buffers width, height and color mode in the argument @arg.
> + * The helper validates the correctness of the input and tests for
> + * possible overflows. If successful, it returns the dumb buffer's
> + * required scanline pitch and size in &args.
> + *
> + * The parameter @hw_pitch_align allows the driver to specifies an
> + * alignment for the scanline pitch, if the hardware requires any. The
> + * calculated pitch will be a multiple of the alignment. The parameter
> + * @hw_size_align allows to specify an alignment for buffer sizes. The
> + * provided alignment should represent requirements of the graphics
> + * hardware. drm_mode_size_dumb() handles GEM-related constraints
> + * automatically across all drivers and hardware. For example, the
> + * returned buffer size is always a multiple of PAGE_SIZE, which is
> + * required by mmap().
> + *
> + * Returns:
> + * Zero on success, or a negative error code otherwise.
> + */
> +int drm_mode_size_dumb(struct drm_device *dev,
> + struct drm_mode_create_dumb *args,
> + unsigned long hw_pitch_align,
> + unsigned long hw_size_align)
> +{
> + u64 pitch = 0;
> + u32 fourcc;
> +
> + /*
> + * The scanline pitch depends on the buffer width and the color
> + * format. The latter is specified as a color-mode constant for
> + * which we first have to find the corresponding color format.
> + *
> + * Different color formats can have the same color-mode constant.
> + * For example XRGB8888 and BGRX8888 both have a color mode of 32.
> + * It is possible to use different formats for dumb-buffer allocation
> + * and rendering as long as all involved formats share the same
> + * color-mode constant.
> + */
> + fourcc = drm_driver_color_mode_format(dev, args->bpp);
> + if (fourcc != DRM_FORMAT_INVALID) {
> + const struct drm_format_info *info = drm_format_info(fourcc);
> +
> + if (!info)
> + return -EINVAL;
> + pitch = drm_format_info_min_pitch(info, 0, args->width);
> + } else if (args->bpp) {
> + /*
> + * Some userspace throws in arbitrary values for bpp and
> + * relies on the kernel to figure it out. In this case we
> + * fall back to the old method of using bpp directly. The
> + * over-commitment of memory from the rounding is acceptable
> + * for compatibility with legacy userspace. We have a number
> + * of deprecated legacy values that are explicitly supported.
> + */
> + switch (args->bpp) {
> + default:
> + drm_warn_once(dev,
> + "Unknown color mode %u; guessing buffer
> size.\n",
> + args->bpp);
> + fallthrough;
> + /*
> + * These constants represent various YUV formats supported by
> + * drm_gem_afbc_get_bpp().
> + */
> + case 12: // DRM_FORMAT_YUV420_8BIT
> + case 15: // DRM_FORMAT_YUV420_10BIT
> + case 30: // DRM_FORMAT_VUY101010
> + fallthrough;
> + /*
> + * Used by Mesa and Gstreamer to allocate NV formats and others
> + * as RGB buffers. Technically, XRGB16161616F formats are RGB,
> + * but the dumb buffers are not supposed to be used for anything
> + * beyond 32 bits per pixels.
> + */
> + case 10: // DRM_FORMAT_NV{15,20,30}, DRM_FORMAT_P010
> + case 64: // DRM_FORMAT_{XRGB,XBGR,ARGB,ABGR}16161616F
> + pitch = args->width * DIV_ROUND_UP(args->bpp, SZ_8);
> + break;
> + }
> + }
> +
> + if (!pitch || pitch > U32_MAX)
> + return -EINVAL;
> +
> + args->pitch = pitch;
> +
> + return drm_mode_align_dumb(args, hw_pitch_align, hw_size_align);
> +}
> +EXPORT_SYMBOL(drm_mode_size_dumb);
> +
> int drm_mode_create_dumb(struct drm_device *dev,
> struct drm_mode_create_dumb *args,
> struct drm_file *file_priv)
> diff --git a/include/drm/drm_dumb_buffers.h b/include/drm/drm_dumb_buffers.h
> new file mode 100644
> index 000000000000..1f3a8236fb3d
> --- /dev/null
> +++ b/include/drm/drm_dumb_buffers.h
> @@ -0,0 +1,14 @@
> +/* SPDX-License-Identifier: MIT */
> +
> +#ifndef __DRM_DUMB_BUFFERS_H__
> +#define __DRM_DUMB_BUFFERS_H__
> +
> +struct drm_device;
> +struct drm_mode_create_dumb;
> +
> +int drm_mode_size_dumb(struct drm_device *dev,
> + struct drm_mode_create_dumb *args,
> + unsigned long hw_pitch_align,
> + unsigned long hw_size_align);
> +
> +#endif
> diff --git a/include/uapi/drm/drm_mode.h b/include/uapi/drm/drm_mode.h
> index c082810c08a8..efe8f5ad35ee 100644
> --- a/include/uapi/drm/drm_mode.h
> +++ b/include/uapi/drm/drm_mode.h
> @@ -1058,7 +1058,7 @@ struct drm_mode_crtc_page_flip_target {
> * struct drm_mode_create_dumb - Create a KMS dumb buffer for scanout.
> * @height: buffer height in pixels
> * @width: buffer width in pixels
> - * @bpp: bits per pixel
> + * @bpp: color mode
> * @flags: must be zero
> * @handle: buffer object handle
> * @pitch: number of bytes between two consecutive lines
> @@ -1066,6 +1066,54 @@ struct drm_mode_crtc_page_flip_target {
> *
> * User-space fills @height, @width, @bpp and @flags. If the IOCTL succeeds,
> * the kernel fills @handle, @pitch and @size.
> + *
> + * The value of @bpp is a color-mode number describing a specific format
> + * or a variant thereof. The value often corresponds to the number of bits
> + * per pixel for most modes, although there are exceptions. Each color mode
> + * maps to a DRM format plus a number of modes with similar pixel layout.
> + * Framebuffer layout is always linear.
> + *
> + * Support for all modes and formats is optional. Even if dumb-buffer
> + * creation with a certain color mode succeeds, it is not guaranteed that
> + * the DRM driver supports any of the related formats. Most drivers support
> + * a color mode of 32 with a format of DRM_FORMAT_XRGB8888 on their primary
> + * plane.
> + *
> + * +------------+------------------------+------------------------+
> + * | Color mode | Framebuffer format | Compatible formats |
> + * +============+========================+========================+
> + * | 32 | * DRM_FORMAT_XRGB8888 | * DRM_FORMAT_BGRX8888 |
> + * | | | * DRM_FORMAT_RGBX8888 |
> + * | | | * DRM_FORMAT_XBGR8888 |
> + * +------------+------------------------+------------------------+
> + * | 24 | * DRM_FORMAT_RGB888 | * DRM_FORMAT_BGR888 |
> + * +------------+------------------------+------------------------+
> + * | 16 | * DRM_FORMAT_RGB565 | * DRM_FORMAT_BGR565 |
> + * +------------+------------------------+------------------------+
> + * | 15 | * DRM_FORMAT_XRGB1555 | * DRM_FORMAT_BGRX1555 |
> + * | | | * DRM_FORMAT_RGBX1555 |
> + * | | | * DRM_FORMAT_XBGR1555 |
> + * +------------+------------------------+------------------------+
> + * | 8 | * DRM_FORMAT_C8 | * DRM_FORMAT_D8 |
> + * | | | * DRM_FORMAT_R8 |
> + * +------------+------------------------+------------------------+
> + * | 4 | * DRM_FORMAT_C4 | * DRM_FORMAT_D4 |
> + * | | | * DRM_FORMAT_R4 |
> + * +------------+------------------------+------------------------+
> + * | 2 | * DRM_FORMAT_C2 | * DRM_FORMAT_D2 |
> + * | | | * DRM_FORMAT_R2 |
> + * +------------+------------------------+------------------------+
> + * | 1 | * DRM_FORMAT_C1 | * DRM_FORMAT_D1 |
> + * | | | * DRM_FORMAT_R1 |
> + * +------------+------------------------+------------------------+
> + *
> + * Color modes of 10, 12, 15, 30 and 64 are only supported for use by
> + * legacy user space. Please don't use them in new code. Other modes
> + * are not support.
> + *
> + * Do not attempt to allocate anything but linear framebuffer memory
> + * with single-plane RGB data. Allocation of other framebuffer
> + * layouts requires dedicated ioctls in the respective DRM driver.
> */
> struct drm_mode_create_dumb {
> __u32 height;
Reviewed-by: Tomi Valkeinen <tomi.valkei...@ideasonboard.com>
Tomi
