[PATCH 08/13] drm/dp: Modify drm_edp_backlight_set_level

[Suraj Kandpal]

Modify drm_edp_backlight_set_level to be able to set the value
for register in DP_EDP_PANEL_TARGET_LUMINANCE_VALUE. We multiply
the level with 1000 since we get the value in Nits and the
register accepts it in milliNits.

Signed-off-by: Suraj Kandpal <suraj.kand...@intel.com>
---
 drivers/gpu/drm/display/drm_dp_helper.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/display/drm_dp_helper.c 
b/drivers/gpu/drm/display/drm_dp_helper.c
index c4c52fb37191..dc0bda84d211 100644
--- a/drivers/gpu/drm/display/drm_dp_helper.c
+++ b/drivers/gpu/drm/display/drm_dp_helper.c
@@ -3936,20 +3936,28 @@ int drm_edp_backlight_set_level(struct drm_dp_aux *aux, 
const struct drm_edp_bac
                                u32 level)
 {
        int ret;
-       u8 buf[2] = { 0 };
+       unsigned int offset = DP_EDP_BACKLIGHT_BRIGHTNESS_MSB;
+       u8 buf[3] = { 0 };
 
        /* The panel uses the PWM for controlling brightness levels */
-       if (!bl->aux_set)
+       if (!(bl->aux_set || bl->luminance_set))
                return 0;
 
-       if (bl->lsb_reg_used) {
+       if (bl->luminance_set) {
+               level = level * 1000;
+               level &= 0xffffff;
+               buf[0] = (level & 0x0000ff);
+               buf[1] = (level & 0x00ff00) >> 8;
+               buf[2] = (level & 0xff0000) >> 16;
+               offset = DP_EDP_PANEL_TARGET_LUMINANCE_VALUE;
+       } else if (bl->lsb_reg_used) {
                buf[0] = (level & 0xff00) >> 8;
                buf[1] = (level & 0x00ff);
        } else {
                buf[0] = level;
        }
 
-       ret = drm_dp_dpcd_write_data(aux, DP_EDP_BACKLIGHT_BRIGHTNESS_MSB, buf, 
sizeof(buf));
+       ret = drm_dp_dpcd_write_data(aux, offset, buf, sizeof(buf));
        if (ret < 0) {
                drm_err(aux->drm_dev,
                        "%s: Failed to write aux backlight level: %d\n",
-- 
2.34.1