github-actions[bot] commented on PR #8337: URL: https://github.com/apache/texera/pull/8337#issuecomment-5503520356
<!-- texera-benchmarks-comment --> ## ⚠️ Benchmark changes need a look 🟢 7 better · 🔴 5 worse · ⚪ 3 noise (<±5%) · 0 without baseline > Compared against main `fe76eec` benchmarked on **this same runner**, so the delta is largely free of cross-runner hardware noise. The "7d avg" column still reflects the gh-pages dashboard. Treat <±5% as noise unless repeated. [Dashboard](https://apache.github.io/texera/dev/bench/) · [Run](https://github.com/apache/texera/actions/runs/33583256421) | | config | throughput | MB/s | latency | max Δ latest / 7d | |---|---|---:|---:|---:|---:| | 🔴 | bs=10 sw=10 sl=64 | 395 | 0.241 | 25,062/36,325/36,325 us | 🟢 -9.0% / 🔴 +128.4% | | 🔴 | bs=100 sw=10 sl=64 | 803 | 0.49 | 126,804/150,812/150,812 us | 🔴 +12.0% / 🔴 +36.3% | | 🟢 | bs=1000 sw=10 sl=64 | 968 | 0.591 | 1,039,824/1,118,371/1,118,371 us | 🟢 -9.4% / 🔴 +6.1% | <details><summary>Baseline details</summary> Latest main `fe76eec` from same runner | config | metric | PR | latest main | 7d avg | Δ latest | Δ 7d | |---|---|---:|---:|---:|---:|---:| | bs=10 sw=10 sl=64 | throughput | 395 tuples/sec | 374 tuples/sec | 750.65 tuples/sec | +5.6% | -47.4% | | bs=10 sw=10 sl=64 | MB/s | 0.241 MB/s | 0.228 MB/s | 0.458 MB/s | +5.7% | -47.4% | | bs=10 sw=10 sl=64 | p50 | 25,062 us | 27,528 us | 13,049 us | -9.0% | +92.1% | | bs=10 sw=10 sl=64 | p95 | 36,325 us | 34,374 us | 15,902 us | +5.7% | +128.4% | | bs=10 sw=10 sl=64 | p99 | 36,325 us | 34,374 us | 19,184 us | +5.7% | +89.4% | | bs=100 sw=10 sl=64 | throughput | 803 tuples/sec | 857 tuples/sec | 960.3 tuples/sec | -6.3% | -16.4% | | bs=100 sw=10 sl=64 | MB/s | 0.49 MB/s | 0.523 MB/s | 0.586 MB/s | -6.3% | -16.4% | | bs=100 sw=10 sl=64 | p50 | 126,804 us | 113,249 us | 104,199 us | +12.0% | +21.7% | | bs=100 sw=10 sl=64 | p95 | 150,812 us | 168,208 us | 110,645 us | -10.3% | +36.3% | | bs=100 sw=10 sl=64 | p99 | 150,812 us | 168,208 us | 120,888 us | -10.3% | +24.8% | | bs=1000 sw=10 sl=64 | throughput | 968 tuples/sec | 990 tuples/sec | 993.27 tuples/sec | -2.2% | -2.5% | | bs=1000 sw=10 sl=64 | MB/s | 0.591 MB/s | 0.604 MB/s | 0.606 MB/s | -2.2% | -2.5% | | bs=1000 sw=10 sl=64 | p50 | 1,039,824 us | 1,007,196 us | 1,012,191 us | +3.2% | +2.7% | | bs=1000 sw=10 sl=64 | p95 | 1,118,371 us | 1,233,904 us | 1,054,057 us | -9.4% | +6.1% | | bs=1000 sw=10 sl=64 | p99 | 1,118,371 us | 1,233,904 us | 1,081,313 us | -9.4% | +3.4% | </details> <details><summary>Raw CSV</summary> ```csv config_idx,batch_size,schema_width,string_len,num_batches,total_ms,total_tuples,total_bytes,tuples_per_sec,mb_per_sec,lat_p50_us,lat_p95_us,lat_p99_us 0,10,10,64,20,505.99,200,128000,395,0.241,25062.24,36325.13,36325.13 1,100,10,64,20,2490.05,2000,1280000,803,0.490,126804.13,150811.93,150811.93 2,1000,10,64,20,20658.79,20000,12800000,968,0.591,1039823.56,1118370.78,1118370.78 ``` </details> -- This is an automated message from the Apache Git Service. To respond to the message, please log on to GitHub and use the URL above to go to the specific comment. To unsubscribe, e-mail: [email protected] For queries about this service, please contact Infrastructure at: [email protected]
