github-actions[bot] commented on PR #8220: URL: https://github.com/apache/texera/pull/8220#issuecomment-5473436896
<!-- texera-benchmarks-comment --> ## ⚠️ Benchmark changes need a look 🟢 2 better · 🔴 5 worse · ⚪ 8 noise (<±5%) · 0 without baseline > Compared against main `70c2114` benchmarked on **this same runner**, so the delta is largely free of cross-runner hardware noise. The "7d avg" column still reflects the gh-pages dashboard. Treat <±5% as noise unless repeated. [Dashboard](https://apache.github.io/texera/dev/bench/) · [Run](https://github.com/apache/texera/actions/runs/33354577801) | | config | throughput | MB/s | latency | max Δ latest / 7d | |---|---|---:|---:|---:|---:| | 🔴 | bs=10 sw=10 sl=64 | 393 | 0.24 | 24,557/32,000/32,000 us | 🟢 -11.6% / 🔴 +116.4% | | 🔴 | bs=100 sw=10 sl=64 | 793 | 0.484 | 122,473/160,351/160,351 us | 🔴 +8.8% / 🔴 +58.9% | | ⚪ | bs=1000 sw=10 sl=64 | 915 | 0.558 | 1,090,337/1,165,590/1,165,590 us | ⚪ within ±5% / 🔴 +20.4% | <details><summary>Baseline details</summary> Latest main `70c2114` from same runner | config | metric | PR | latest main | 7d avg | Δ latest | Δ 7d | |---|---|---:|---:|---:|---:|---:| | bs=10 sw=10 sl=64 | throughput | 393 tuples/sec | 412 tuples/sec | 844.57 tuples/sec | -4.6% | -53.5% | | bs=10 sw=10 sl=64 | MB/s | 0.24 MB/s | 0.252 MB/s | 0.515 MB/s | -4.8% | -53.4% | | bs=10 sw=10 sl=64 | p50 | 24,557 us | 22,243 us | 11,837 us | +10.4% | +107.5% | | bs=10 sw=10 sl=64 | p95 | 32,000 us | 36,208 us | 14,788 us | -11.6% | +116.4% | | bs=10 sw=10 sl=64 | p99 | 32,000 us | 36,208 us | 17,651 us | -11.6% | +81.3% | | bs=100 sw=10 sl=64 | throughput | 793 tuples/sec | 843 tuples/sec | 1,084 tuples/sec | -5.9% | -26.8% | | bs=100 sw=10 sl=64 | MB/s | 0.484 MB/s | 0.514 MB/s | 0.662 MB/s | -5.8% | -26.9% | | bs=100 sw=10 sl=64 | p50 | 122,473 us | 117,504 us | 94,505 us | +4.2% | +29.6% | | bs=100 sw=10 sl=64 | p95 | 160,351 us | 147,366 us | 100,941 us | +8.8% | +58.9% | | bs=100 sw=10 sl=64 | p99 | 160,351 us | 147,366 us | 108,642 us | +8.8% | +47.6% | | bs=1000 sw=10 sl=64 | throughput | 915 tuples/sec | 918 tuples/sec | 1,119 tuples/sec | -0.3% | -18.3% | | bs=1000 sw=10 sl=64 | MB/s | 0.558 MB/s | 0.56 MB/s | 0.683 MB/s | -0.4% | -18.3% | | bs=1000 sw=10 sl=64 | p50 | 1,090,337 us | 1,089,870 us | 924,404 us | +0.0% | +18.0% | | bs=1000 sw=10 sl=64 | p95 | 1,165,590 us | 1,135,031 us | 967,785 us | +2.7% | +20.4% | | bs=1000 sw=10 sl=64 | p99 | 1,165,590 us | 1,135,031 us | 995,630 us | +2.7% | +17.1% | </details> <details><summary>Raw CSV</summary> ```csv config_idx,batch_size,schema_width,string_len,num_batches,total_ms,total_tuples,total_bytes,tuples_per_sec,mb_per_sec,lat_p50_us,lat_p95_us,lat_p99_us 0,10,10,64,20,509.32,200,128000,393,0.240,24556.98,31999.62,31999.62 1,100,10,64,20,2521.63,2000,1280000,793,0.484,122472.78,160350.65,160350.65 2,1000,10,64,20,21863.39,20000,12800000,915,0.558,1090336.65,1165589.68,1165589.68 ``` </details> -- This is an automated message from the Apache Git Service. To respond to the message, please log on to GitHub and use the URL above to go to the specific comment. To unsubscribe, e-mail: [email protected] For queries about this service, please contact Infrastructure at: [email protected]
