github-actions[bot] commented on PR #8206: URL: https://github.com/apache/texera/pull/8206#issuecomment-5473212074
<!-- texera-benchmarks-comment --> ## ⚠️ Benchmark changes need a look 🟢 2 better · 🔴 4 worse · ⚪ 9 noise (<±5%) · 0 without baseline > Compared against main `70c2114` benchmarked on **this same runner**, so the delta is largely free of cross-runner hardware noise. The "7d avg" column still reflects the gh-pages dashboard. Treat <±5% as noise unless repeated. [Dashboard](https://apache.github.io/texera/dev/bench/) · [Run](https://github.com/apache/texera/actions/runs/33352633895) | | config | throughput | MB/s | latency | max Δ latest / 7d | |---|---|---:|---:|---:|---:| | 🟢 | bs=10 sw=10 sl=64 | 387 | 0.236 | 25,036/31,791/31,791 us | 🟢 -5.1% / 🔴 +115.0% | | 🔴 | bs=100 sw=10 sl=64 | 767 | 0.468 | 125,882/198,743/198,743 us | 🔴 +31.7% / 🔴 +96.9% | | ⚪ | bs=1000 sw=10 sl=64 | 902 | 0.55 | 1,108,105/1,166,733/1,166,733 us | ⚪ within ±5% / 🔴 +20.6% | <details><summary>Baseline details</summary> Latest main `70c2114` from same runner | config | metric | PR | latest main | 7d avg | Δ latest | Δ 7d | |---|---|---:|---:|---:|---:|---:| | bs=10 sw=10 sl=64 | throughput | 387 tuples/sec | 400 tuples/sec | 844.57 tuples/sec | -3.3% | -54.2% | | bs=10 sw=10 sl=64 | MB/s | 0.236 MB/s | 0.244 MB/s | 0.515 MB/s | -3.3% | -54.2% | | bs=10 sw=10 sl=64 | p50 | 25,036 us | 25,200 us | 11,837 us | -0.6% | +111.5% | | bs=10 sw=10 sl=64 | p95 | 31,791 us | 33,499 us | 14,788 us | -5.1% | +115.0% | | bs=10 sw=10 sl=64 | p99 | 31,791 us | 33,499 us | 17,651 us | -5.1% | +80.1% | | bs=100 sw=10 sl=64 | throughput | 767 tuples/sec | 817 tuples/sec | 1,084 tuples/sec | -6.1% | -29.2% | | bs=100 sw=10 sl=64 | MB/s | 0.468 MB/s | 0.499 MB/s | 0.662 MB/s | -6.2% | -29.3% | | bs=100 sw=10 sl=64 | p50 | 125,882 us | 120,213 us | 94,505 us | +4.7% | +33.2% | | bs=100 sw=10 sl=64 | p95 | 198,743 us | 150,940 us | 100,941 us | +31.7% | +96.9% | | bs=100 sw=10 sl=64 | p99 | 198,743 us | 150,940 us | 108,642 us | +31.7% | +82.9% | | bs=1000 sw=10 sl=64 | throughput | 902 tuples/sec | 906 tuples/sec | 1,119 tuples/sec | -0.4% | -19.4% | | bs=1000 sw=10 sl=64 | MB/s | 0.55 MB/s | 0.553 MB/s | 0.683 MB/s | -0.5% | -19.5% | | bs=1000 sw=10 sl=64 | p50 | 1,108,105 us | 1,100,545 us | 924,404 us | +0.7% | +19.9% | | bs=1000 sw=10 sl=64 | p95 | 1,166,733 us | 1,174,712 us | 967,785 us | -0.7% | +20.6% | | bs=1000 sw=10 sl=64 | p99 | 1,166,733 us | 1,174,712 us | 995,630 us | -0.7% | +17.2% | </details> <details><summary>Raw CSV</summary> ```csv config_idx,batch_size,schema_width,string_len,num_batches,total_ms,total_tuples,total_bytes,tuples_per_sec,mb_per_sec,lat_p50_us,lat_p95_us,lat_p99_us 0,10,10,64,20,517.10,200,128000,387,0.236,25036.40,31791.22,31791.22 1,100,10,64,20,2607.78,2000,1280000,767,0.468,125882.44,198743.32,198743.32 2,1000,10,64,20,22180.12,20000,12800000,902,0.550,1108105.40,1166733.05,1166733.05 ``` </details> -- This is an automated message from the Apache Git Service. To respond to the message, please log on to GitHub and use the URL above to go to the specific comment. To unsubscribe, e-mail: [email protected] For queries about this service, please contact Infrastructure at: [email protected]
