github-actions[bot] commented on PR #8186: URL: https://github.com/apache/texera/pull/8186#issuecomment-5472653332
<!-- texera-benchmarks-comment --> ## ⚠️ Benchmark changes need a look 🟢 2 better · 🔴 1 worse · ⚪ 12 noise (<±5%) · 0 without baseline > Compared against main `70c2114` benchmarked on **this same runner**, so the delta is largely free of cross-runner hardware noise. The "7d avg" column still reflects the gh-pages dashboard. Treat <±5% as noise unless repeated. [Dashboard](https://apache.github.io/texera/dev/bench/) · [Run](https://github.com/apache/texera/actions/runs/33347948921) | | config | throughput | MB/s | latency | max Δ latest / 7d | |---|---|---:|---:|---:|---:| | 🔴 | bs=10 sw=10 sl=64 | 378 | 0.231 | 25,097/34,322/34,322 us | 🟢 -10.2% / 🔴 +132.1% | | ⚪ | bs=100 sw=10 sl=64 | 797 | 0.487 | 123,361/157,762/157,762 us | ⚪ within ±5% / 🔴 +56.3% | | ⚪ | bs=1000 sw=10 sl=64 | 918 | 0.56 | 1,090,193/1,151,143/1,151,143 us | ⚪ within ±5% / 🔴 +18.9% | <details><summary>Baseline details</summary> Latest main `70c2114` from same runner | config | metric | PR | latest main | 7d avg | Δ latest | Δ 7d | |---|---|---:|---:|---:|---:|---:| | bs=10 sw=10 sl=64 | throughput | 378 tuples/sec | 395 tuples/sec | 844.57 tuples/sec | -4.3% | -55.2% | | bs=10 sw=10 sl=64 | MB/s | 0.231 MB/s | 0.241 MB/s | 0.515 MB/s | -4.1% | -55.2% | | bs=10 sw=10 sl=64 | p50 | 25,097 us | 23,136 us | 11,837 us | +8.5% | +112.0% | | bs=10 sw=10 sl=64 | p95 | 34,322 us | 38,236 us | 14,788 us | -10.2% | +132.1% | | bs=10 sw=10 sl=64 | p99 | 34,322 us | 38,236 us | 17,651 us | -10.2% | +94.4% | | bs=100 sw=10 sl=64 | throughput | 797 tuples/sec | 806 tuples/sec | 1,084 tuples/sec | -1.1% | -26.5% | | bs=100 sw=10 sl=64 | MB/s | 0.487 MB/s | 0.492 MB/s | 0.662 MB/s | -1.0% | -26.4% | | bs=100 sw=10 sl=64 | p50 | 123,361 us | 118,168 us | 94,505 us | +4.4% | +30.5% | | bs=100 sw=10 sl=64 | p95 | 157,762 us | 155,636 us | 100,941 us | +1.4% | +56.3% | | bs=100 sw=10 sl=64 | p99 | 157,762 us | 155,636 us | 108,642 us | +1.4% | +45.2% | | bs=1000 sw=10 sl=64 | throughput | 918 tuples/sec | 917 tuples/sec | 1,119 tuples/sec | +0.1% | -18.0% | | bs=1000 sw=10 sl=64 | MB/s | 0.56 MB/s | 0.56 MB/s | 0.683 MB/s | 0.0% | -18.0% | | bs=1000 sw=10 sl=64 | p50 | 1,090,193 us | 1,092,849 us | 924,404 us | -0.2% | +17.9% | | bs=1000 sw=10 sl=64 | p95 | 1,151,143 us | 1,134,057 us | 967,785 us | +1.5% | +18.9% | | bs=1000 sw=10 sl=64 | p99 | 1,151,143 us | 1,134,057 us | 995,630 us | +1.5% | +15.6% | </details> <details><summary>Raw CSV</summary> ```csv config_idx,batch_size,schema_width,string_len,num_batches,total_ms,total_tuples,total_bytes,tuples_per_sec,mb_per_sec,lat_p50_us,lat_p95_us,lat_p99_us 0,10,10,64,20,528.68,200,128000,378,0.231,25097.10,34322.43,34322.43 1,100,10,64,20,2508.86,2000,1280000,797,0.487,123361.01,157762.28,157762.28 2,1000,10,64,20,21783.37,20000,12800000,918,0.560,1090193.25,1151143.27,1151143.27 ``` </details> -- This is an automated message from the Apache Git Service. To respond to the message, please log on to GitHub and use the URL above to go to the specific comment. To unsubscribe, e-mail: [email protected] For queries about this service, please contact Infrastructure at: [email protected]
