github-actions[bot] commented on PR #7348: URL: https://github.com/apache/texera/pull/7348#issuecomment-5198981003
<!-- texera-benchmarks-comment --> ## ⚠️ Benchmark changes need a look 🟢 2 better · 🔴 2 worse · ⚪ 11 noise (<±5%) · 0 without baseline > Compared against main `69c66a1` benchmarked on **this same runner**, so the delta is largely free of cross-runner hardware noise. The "7d avg" column still reflects the gh-pages dashboard. Treat <±5% as noise unless repeated. [Dashboard](https://apache.github.io/texera/dev/bench/) · [Run](https://github.com/apache/texera/actions/runs/31059431566) | | config | throughput | MB/s | latency | max Δ latest / 7d | |---|---|---:|---:|---:|---:| | 🟢 | bs=10 sw=10 sl=64 | 372 | 0.227 | 26,613/37,236/37,236 us | 🟢 -7.1% / 🔴 +134.2% | | ⚪ | bs=100 sw=10 sl=64 | 784 | 0.478 | 123,600/179,330/179,330 us | ⚪ within ±5% / 🔴 +63.5% | | 🔴 | bs=1000 sw=10 sl=64 | 901 | 0.55 | 1,108,259/1,208,964/1,208,964 us | 🔴 +7.4% / 🔴 +15.7% | <details><summary>Baseline details</summary> Latest main `69c66a1` from same runner | config | metric | PR | latest main | 7d avg | Δ latest | Δ 7d | |---|---|---:|---:|---:|---:|---:| | bs=10 sw=10 sl=64 | throughput | 372 tuples/sec | 374 tuples/sec | 762.27 tuples/sec | -0.5% | -51.2% | | bs=10 sw=10 sl=64 | MB/s | 0.227 MB/s | 0.228 MB/s | 0.465 MB/s | -0.4% | -51.2% | | bs=10 sw=10 sl=64 | p50 | 26,613 us | 26,612 us | 12,866 us | +0.0% | +106.9% | | bs=10 sw=10 sl=64 | p95 | 37,236 us | 40,084 us | 15,903 us | -7.1% | +134.2% | | bs=10 sw=10 sl=64 | p99 | 37,236 us | 40,084 us | 19,260 us | -7.1% | +93.3% | | bs=100 sw=10 sl=64 | throughput | 784 tuples/sec | 792 tuples/sec | 966.64 tuples/sec | -1.0% | -18.9% | | bs=100 sw=10 sl=64 | MB/s | 0.478 MB/s | 0.483 MB/s | 0.59 MB/s | -1.0% | -19.0% | | bs=100 sw=10 sl=64 | p50 | 123,600 us | 121,382 us | 103,594 us | +1.8% | +19.3% | | bs=100 sw=10 sl=64 | p95 | 179,330 us | 175,087 us | 109,677 us | +2.4% | +63.5% | | bs=100 sw=10 sl=64 | p99 | 179,330 us | 175,087 us | 120,247 us | +2.4% | +49.1% | | bs=1000 sw=10 sl=64 | throughput | 901 tuples/sec | 919 tuples/sec | 998.67 tuples/sec | -2.0% | -9.8% | | bs=1000 sw=10 sl=64 | MB/s | 0.55 MB/s | 0.561 MB/s | 0.61 MB/s | -2.0% | -9.8% | | bs=1000 sw=10 sl=64 | p50 | 1,108,259 us | 1,088,185 us | 1,009,199 us | +1.8% | +9.8% | | bs=1000 sw=10 sl=64 | p95 | 1,208,964 us | 1,125,895 us | 1,045,335 us | +7.4% | +15.7% | | bs=1000 sw=10 sl=64 | p99 | 1,208,964 us | 1,125,895 us | 1,076,869 us | +7.4% | +12.3% | </details> <details><summary>Raw CSV</summary> ```csv config_idx,batch_size,schema_width,string_len,num_batches,total_ms,total_tuples,total_bytes,tuples_per_sec,mb_per_sec,lat_p50_us,lat_p95_us,lat_p99_us 0,10,10,64,20,537.81,200,128000,372,0.227,26613.25,37236.20,37236.20 1,100,10,64,20,2551.44,2000,1280000,784,0.478,123599.58,179330.26,179330.26 2,1000,10,64,20,22202.20,20000,12800000,901,0.550,1108259.08,1208964.08,1208964.08 ``` </details> -- This is an automated message from the Apache Git Service. To respond to the message, please log on to GitHub and use the URL above to go to the specific comment. To unsubscribe, e-mail: [email protected] For queries about this service, please contact Infrastructure at: [email protected]
