github-actions[bot] commented on PR #6083: URL: https://github.com/apache/texera/pull/6083#issuecomment-4880658817
<!-- texera-benchmarks-comment --> ## ⚠️ Benchmark changes need a look 🟢 0 better · 🔴 4 worse · ⚪ 11 noise (<±5%) · 0 without baseline > Compared against main `3dd4c2b` benchmarked on **this same runner**, so the delta is largely free of cross-runner hardware noise. The "7d avg" column still reflects the gh-pages dashboard. Treat <±5% as noise unless repeated. [Dashboard](https://apache.github.io/texera/dev/bench/) · [Run](https://github.com/apache/texera/actions/runs/28694929808) | | config | throughput | MB/s | latency | max Δ latest / 7d | |---|---|---:|---:|---:|---:| | 🔴 | bs=10 sw=10 sl=64 | 371 | 0.226 | 25,442/47,832/47,832 us | 🔴 +6.5% / 🔴 +212.0% | | ⚪ | bs=100 sw=10 sl=64 | 827 | 0.505 | 119,478/150,340/150,340 us | ⚪ within ±5% / 🔴 +38.8% | | ⚪ | bs=1000 sw=10 sl=64 | 923 | 0.563 | 1,083,463/1,130,338/1,130,338 us | ⚪ within ±5% / 🔴 +9.5% | <details><summary>Baseline details</summary> Latest main `3dd4c2b` from same runner | config | metric | PR | latest main | 7d avg | Δ latest | Δ 7d | |---|---|---:|---:|---:|---:|---:| | bs=10 sw=10 sl=64 | throughput | 371 tuples/sec | 395 tuples/sec | 772.08 tuples/sec | -6.1% | -51.9% | | bs=10 sw=10 sl=64 | MB/s | 0.226 MB/s | 0.241 MB/s | 0.471 MB/s | -6.2% | -52.0% | | bs=10 sw=10 sl=64 | p50 | 25,442 us | 24,733 us | 12,745 us | +2.9% | +99.6% | | bs=10 sw=10 sl=64 | p95 | 47,832 us | 44,909 us | 15,330 us | +6.5% | +212.0% | | bs=10 sw=10 sl=64 | p99 | 47,832 us | 44,909 us | 19,054 us | +6.5% | +151.0% | | bs=100 sw=10 sl=64 | throughput | 827 tuples/sec | 818 tuples/sec | 982.64 tuples/sec | +1.1% | -15.8% | | bs=100 sw=10 sl=64 | MB/s | 0.505 MB/s | 0.499 MB/s | 0.6 MB/s | +1.2% | -15.8% | | bs=100 sw=10 sl=64 | p50 | 119,478 us | 124,169 us | 101,961 us | -3.8% | +17.2% | | bs=100 sw=10 sl=64 | p95 | 150,340 us | 144,015 us | 108,335 us | +4.4% | +38.8% | | bs=100 sw=10 sl=64 | p99 | 150,340 us | 144,015 us | 114,379 us | +4.4% | +31.4% | | bs=1000 sw=10 sl=64 | throughput | 923 tuples/sec | 916 tuples/sec | 1,013 tuples/sec | +0.8% | -8.9% | | bs=1000 sw=10 sl=64 | MB/s | 0.563 MB/s | 0.559 MB/s | 0.618 MB/s | +0.7% | -9.0% | | bs=1000 sw=10 sl=64 | p50 | 1,083,463 us | 1,090,078 us | 993,573 us | -0.6% | +9.0% | | bs=1000 sw=10 sl=64 | p95 | 1,130,338 us | 1,148,469 us | 1,032,489 us | -1.6% | +9.5% | | bs=1000 sw=10 sl=64 | p99 | 1,130,338 us | 1,148,469 us | 1,065,526 us | -1.6% | +6.1% | </details> <details><summary>Raw CSV</summary> ```csv config_idx,batch_size,schema_width,string_len,num_batches,total_ms,total_tuples,total_bytes,tuples_per_sec,mb_per_sec,lat_p50_us,lat_p95_us,lat_p99_us 0,10,10,64,20,539.22,200,128000,371,0.226,25441.50,47831.55,47831.55 1,100,10,64,20,2417.10,2000,1280000,827,0.505,119477.60,150339.54,150339.54 2,1000,10,64,20,21669.33,20000,12800000,923,0.563,1083463.46,1130337.57,1130337.57 ``` </details> -- This is an automated message from the Apache Git Service. To respond to the message, please log on to GitHub and use the URL above to go to the specific comment. To unsubscribe, e-mail: [email protected] For queries about this service, please contact Infrastructure at: [email protected]
