I own a Plextor PX-W1210TA internal CD-RW. When I boot off of the Mandrake 7.2
inst CD I
successfully get the page with the penguin and two choices: F1 for more options,
Enter to continue. When I press I get the following error: "The CDROM device
does not seem to contain a Linux Mandrake CDROM." After pressing OK the dialog,
"Initializing CDROM..." appears, but never goes away.
CTRL+ALT+F4 yields:
<4>hda:PLEXTOR CD-R PX-W1210A, ATAPI CDROM drive
<4>ide0@0x1f0-0x1f7,0x3f6 on irq 14
<4>...autorunDONE
<4>VFS: mounted root (ext2 filesystem)
<4>hda: ATAPI32X CD-ROM CD-R/RW drive, 2048 Kb cache, DMA
<4>uniform CD-ROM driver revision: 3.11
<4>VFS: disc change detected on device ide0 (3,0)
<4>warning: defective cdrom. Enabling "cruft" mount option.
<4>interleaved files not (yet supported)
<4>file unit size != 0 for ISO file (67584).
<4>hda: status error: status = 0x58 {driveReady seekComplete dataRequest}
<4>hda: drive not ready for command
<4>hda: status time out: status - 0xd0 {busy}
<4>hda: DMA disabled, drive not ready for command
CTRL+ALT+F3 yields:
Welcome to the Mandrake install (first stage, version 7.2 built 10/23/00)
running /bin/insmod /bin/insmod /modules/fat.o
running /bin/insmod /bin/insmod /modules/vfat.o
PCI bridge probe: not found
Intel PCIC probe not found.
Databook TCIC-2 probe: not found
running /bin/insmod /bin/insmod /modules/isofs.o
running /bin/insmod /bin/insmod /modules/ide-probe.o
insmod failed!
running /bin/insmod /bin/insmod /modules/ide-probe-mod.o
insmod failed!
running /bin/insmod /bin/insmod /modules/cdrom.o
running /bin/insmod /bin/insmod /modules/ide-cd.o
mounting hda on /temp/rhimage as type iso9660
creating directory /temp/rhimage rc=0
calling mount (/temp/hda, /temp/rhimage, iso9660, -1058209791, (nil))
removing device file /temp/hda
Thanks for any help you can provide.
Larry
