On Fri, Jul 18, 2008 at 1:20 PM, James Carlson <[EMAIL PROTECTED]> wrote:
> Piotr Jasiukajtis writes:
>> On 7/17/08, Rao Shoaib <[EMAIL PROTECTED]> wrote:
>> >  e1000g is a generic driver for lots of intel chipsets. As we are learning
>> > in the performance work not all of them behave the same, in case of e1000g
>> > you really have to look at the chipset to make any comparison.
>> This is my NIC (Lenovo T61):
>>
>> Jul 19 20:57:35 nx0 pcplusmp: [ID 803547 kern.info] pcplusmp:
>> pci8086,1049 (e1000g) instance 0 vector 0x18 ioapic 0xff intin 0xff is
>> bound to cpu 1
>> Jul 19 20:57:35 nx0 mac: [ID 469746 kern.info] NOTICE: e1000g0 registered
>> Jul 19 20:57:35 nx0 e1000g: [ID 766679 kern.info] Intel(R) PRO/1000
>> Network Connection, Driver Ver. 5.2.9
>> Jul 19 20:57:37 nx0 mac: [ID 435574 kern.info] NOTICE: e1000g0 link
>> up, 1000 Mbps, full duplex
>
> My home system (which seems to work well and is running snv_92)
> reports this driver as:
>
> Jun 27 08:51:16 carlson pcplusmp: [ID 803547 kern.info] pcplusmp: 
> pci8086,1079 (e1000g) instance 1 vector 0x1b ioapic 0x2 intin 0x3 is bound to 
> cpu 0
> Jun 27 08:51:16 carlson e1000g: [ID 766679 kern.info] Intel(R) PRO/1000 
> Network Connection, Driver Ver. 5.2.8
> Jun 27 08:51:18 carlson mac: [ID 435574 kern.info] NOTICE: e1000g1 link up, 
> 100 Mbps, half duplex
>
> The differences here include the PCI IDs (I have 10bd and 1079, you
> have 1049), the driver version (!), and the fact that I've got some
> really, really old hubs.  ;-}
>
> On the driver version number, something strange is afoot.  Looking at
> the source versioning in the gate, 5.2.9 corresponds with CR 6713685,
> which integrated in snv_93.  Are you sure you're running snv_91?
>
> In any event, both the different chipset and the type of interface
> could make a difference here.
Ok I have just used belenix 0.7.1 test2 which is snv91 based and the
problem exists.

Jul 19 16:11:35 belenix pcplusmp: [ID 803547 kern.info] pcplusmp:
pci8086,1049 (e1000g) instance 0 vector 0x18 ioapic 0xff intin 0xff is
bound to cpu 0
Jul 19 16:11:35 belenix mac: [ID 469746 kern.info] NOTICE: e1000g0 registered
Jul 19 16:11:35 belenix e1000g: [ID 766679 kern.info] Intel(R)
PRO/1000 Network Connection, Driver Ver. 5.2.7
Jul 19 16:12:35 belenix mac: [ID 435574 kern.info] NOTICE: e1000g0
link up, 1000 Mbps, full duplex


-- 
Regards,
Piotr Jasiukajtis | estibi | SCA OS0072
http://estseg.blogspot.com
_______________________________________________
networking-discuss mailing list
networking-discuss@opensolaris.org

Reply via email to