We need that for a custom hardware that needs the reverse reset sequence. Signed-off-by: Bernhard Walle <bernh...@bwalle.de> --- Documentation/devicetree/bindings/net/fsl-fec.txt | 3 +++ drivers/net/ethernet/freescale/fec_main.c | 8 ++++++-- 2 files changed, 9 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt index a9eb611..a4799ff 100644 --- a/Documentation/devicetree/bindings/net/fsl-fec.txt +++ b/Documentation/devicetree/bindings/net/fsl-fec.txt @@ -12,6 +12,9 @@ Optional properties: only if property "phy-reset-gpios" is available. Missing the property will have the duration be 1 millisecond. Numbers greater than 1000 are invalid and 1 millisecond will be used instead. +- phy-reset-active-low : If present then the reset sequence using the GPIO + specified in the "phy-reset-gpios" property is reversed (H=reset state, + L=operation state). ____________________________
Shouldn't this be named phy-reset-active-high, as you are making the reset active high H=reset, L= normal operation Troy
