From: Amir Vadai <a...@vadai.me>
RdropOvflw counts overrun of HW buffer, therefore should
be used for rx_fifo_errors only.
Currently RdropOvflw counter is mistakenly also set into
rx_missed_errors and rx_over_errors too, which makes the
device total dropped packets accounting to show wrong results.
Fix that. Use it for rx_fifo_errors only.
Fixes: c27a02cd94d6 ('mlx4_en: Add driver for Mellanox ConnectX 10GbE NIC')
Signed-off-by: Amir Vadai <a...@vadai.me>
Signed-off-by: Eugenia Emantayev <euge...@mellanox.com>
Signed-off-by: Or Gerlitz <ogerl...@mellanox.com>
---
drivers/net/ethernet/mellanox/mlx4/en_port.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_port.c
b/drivers/net/ethernet/mellanox/mlx4/en_port.c
index ee99e67..3904b5f 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_port.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_port.c
@@ -238,11 +238,11 @@ int mlx4_en_DUMP_ETH_STATS(struct mlx4_en_dev *mdev, u8
port, u8 reset)
stats->collisions = 0;
stats->rx_dropped = be32_to_cpu(mlx4_en_stats->RDROP);
stats->rx_length_errors = be32_to_cpu(mlx4_en_stats->RdropLength);
- stats->rx_over_errors = be32_to_cpu(mlx4_en_stats->RdropOvflw);
+ stats->rx_over_errors = 0;
stats->rx_crc_errors = be32_to_cpu(mlx4_en_stats->RCRC);
stats->rx_frame_errors = 0;
stats->rx_fifo_errors = be32_to_cpu(mlx4_en_stats->RdropOvflw);
- stats->rx_missed_errors = be32_to_cpu(mlx4_en_stats->RdropOvflw);
+ stats->rx_missed_errors = 0;
stats->tx_aborted_errors = 0;
stats->tx_carrier_errors = 0;
stats->tx_fifo_errors = 0;
--
2.3.7
