Hello,
Garbled output for "ethtool -m ethX", in igb-driven NICs with module /
plugin EEPROM (i.e. SFP information). Each output data byte appears
duplicated.
In igb_ethtool.c, igb_get_module_eeprom() is reading the EEPROM via i2c;
the eeprom offset for each word that's read via igb_read_phy_reg_i2c()
was passed in #words, whereas it needs to be a byte offset.
This patches fixes the bug.
Signed-off-by: Doron Shikmoni <doron.shikm...@gmail.com>
---
drivers/net/ethernet/intel/igb/igb_ethtool.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c
b/drivers/net/ethernet/intel/igb/igb_ethtool.c
index 1d329f1..7bcc0e1e 100644
--- a/drivers/net/ethernet/intel/igb/igb_ethtool.c
+++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c
@@ -2831,7 +2831,7 @@ static int igb_get_module_eeprom(struct net_device
*netdev,
/* Read EEPROM block, SFF-8079/SFF-8472, word at a time */
for (i = 0; i < last_word - first_word + 1; i++) {
- status = igb_read_phy_reg_i2c(hw, first_word + i, &dataword[i]);
+ status = igb_read_phy_reg_i2c(hw, (first_word + i) * 2,
&dataword[i]);
if (status) {
/* Error occurred while reading module */
kfree(dataword);
--
1.7.10.4
