On Mon, Feb 08, 2016 at 09:21:13PM +0100, Bernhard Walle wrote:
> We need that for a custom hardware that needs the reverse reset
> sequence.
>
> Signed-off-by: Bernhard Walle <bernh...@bwalle.de>
> ---
> Documentation/devicetree/bindings/net/fsl-fec.txt | 3 +++
> drivers/net/ethernet/freescale/fec_main.c | 8 ++++++--
> 2 files changed, 9 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt
> b/Documentation/devicetree/bindings/net/fsl-fec.txt
> index a9eb611..a4799ff 100644
> --- a/Documentation/devicetree/bindings/net/fsl-fec.txt
> +++ b/Documentation/devicetree/bindings/net/fsl-fec.txt
> @@ -12,6 +12,9 @@ Optional properties:
> only if property "phy-reset-gpios" is available. Missing the property
> will have the duration be 1 millisecond. Numbers greater than 1000 are
> invalid and 1 millisecond will be used instead.
> +- phy-reset-active-low : If present then the reset sequence using the GPIO
> + specified in the "phy-reset-gpios" property is reversed (H=reset state,
> + L=operation state).
Hi Bernhard
Maybe at the same time add a comment to phy-reset-gpios that the flags
part is ignored, see the none standard phy-reset-active-low property
instead.
Andrew
