From: Lothar Waßmann <l...@karo-electronics.de> Sent: Monday, November 30, 2015
7:33 PM
> To: Andrew Lunn; David S. Miller; Estevam Fabio-R49496; Greg Ungerer;
> Kevin Hao; Lothar Waßmann; Lucas Stach; Duan Fugang-B38611; Philippe
> Reynes; Richard Cochran; Russell King; Sascha Hauer; Stefan Agner; linux-
> ker...@vger.kernel.org; netdev@vger.kernel.org; Jeff Kirsher; Uwe Kleine-
> König
> Subject: [PATCH 2/3] net: fec: convert to using gpiod framework
>
> Use gpiod_get_optional() instead of checking for a valid GPIO number and
> calling devm_gpio_request_one() conditionally.
>
> Signed-off-by: Lothar Waßmann <l...@karo-electronics.de>
> ---
> drivers/net/ethernet/freescale/fec_main.c | 17 +++++++----------
> 1 file changed, 7 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/net/ethernet/freescale/fec_main.c
> b/drivers/net/ethernet/freescale/fec_main.c
> index e17d74f..1a983fc 100644
> --- a/drivers/net/ethernet/freescale/fec_main.c
> +++ b/drivers/net/ethernet/freescale/fec_main.c
> @@ -3233,7 +3233,7 @@ static int fec_enet_init(struct net_device *ndev)
> #ifdef CONFIG_OF static void fec_reset_phy(struct platform_device *pdev)
> {
> - int err, phy_reset;
> + struct gpio_desc *phy_reset;
> int msec = 1;
> struct device_node *np = pdev->dev.of_node;
>
> @@ -3245,18 +3245,15 @@ static void fec_reset_phy(struct platform_device
> *pdev)
> if (msec > 1000)
> msec = 1;
>
> - phy_reset = of_get_named_gpio(np, "phy-reset-gpios", 0);
> - if (!gpio_is_valid(phy_reset))
> - return;
> -
> - err = devm_gpio_request_one(&pdev->dev, phy_reset,
> - GPIOF_OUT_INIT_LOW, "phy-reset");
> - if (err) {
> - dev_err(&pdev->dev, "failed to get phy-reset-gpios: %d\n",
> err);
> + phy_reset = devm_gpiod_get_optional(&pdev->dev, "phy-reset",
> + GPIOD_OUT_LOW);
> + if (IS_ERR(phy_reset)) {
> + dev_err(&pdev->dev, "failed to get phy-reset-gpios: %ld\n",
> + PTR_ERR(phy_reset));
> return;
> }
> msleep(msec);
> - gpio_set_value_cansleep(phy_reset, 1);
> + gpiod_set_value_cansleep(phy_reset, 1);
This API will judge the GPIO active polarity, there many imx boards in dts
files don't care the polarity.
So pls drop the patch.
Or use gpiod_set_raw_value_cansleep() instead of gpiod_set_value_cansleep().
> }
> #else /* CONFIG_OF */
> static void fec_reset_phy(struct platform_device *pdev)
> --
> 2.1.4
