FYI
On 30 November 2015 at 10:48 AM, Christian Zigotzky wrote:
Hi Denis,
Thank you for your answer. Sorry because of my description.
Yes, the driver probe function finds the device.
With kernel 4.4-rc3:
dmesg | grep -i eth0
[ 2.297473] eth0: PA Semi GMAC: intf 5, hw addr 02:00:e0:0a:30:00
dhclient eth0
RTNETLINK answers: Cannot allocate memory
With kernel 4.1.13:
dmesg | grep -i eth0
[ 2.328115] eth0: PA Semi GMAC: intf 5, hw addr 02:00:e0:0a:30:00
[ 37.130466] eth0: Link is up at 100 Mbps, full duplex.
Cheers,
Christian
On 30 November 2015 at 09:37 AM, Denis Kirjanov wrote:
On 11/29/15, Christian Zigotzky <chzigot...@xenosoft.de> wrote:
Hi All,
Does the ethernet interface on your Electra, Chitra, Nemo, and Athena
board work with the release candidates of the kernel 4.4? Unfortunately
the P.A. Semi ethernet doesn't work on our Nemo boards with the release
candidates of the kernel 4.4. We have set the following entries in the
kernel config:
CONFIG_NET_VENDOR_PASEMI=y
CONFIG_PASEMI_MAC=y
Could you please test the P.A. Semi ethernet on your P.A. Semi boards?
It's not clear from your descriptions what is not working. Does the
driver probe function find a device? Does the interface show up in
the kernel? Can it send/receive packets?
Also please CC netdev.
Thanks.
Thanks in advance,
Christian
_______________________________________________
Linuxppc-dev mailing list
linuxppc-...@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
