From: Ido Schimmel <ido...@mellanox.com>
The operation of adding VLANs on a port via switchdev ops can fail and
we need to be prepared for it. If we do not rollback hardware operations
following a failure, hardware and software will remain in an
inconsistent state.
Solve that by adding suitable error paths to __mlxsw_sp_port_vlans_add.
Signed-off-by: Ido Schimmel <ido...@mellanox.com>
Signed-off-by: Jiri Pirko <j...@mellanox.com>
---
.../ethernet/mellanox/mlxsw/spectrum_switchdev.c | 61 ++++++++++++++++------
1 file changed, 46 insertions(+), 15 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
index fe88165..f21e239 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
@@ -369,8 +369,8 @@ static int __mlxsw_sp_port_vlans_add(struct mlxsw_sp_port
*mlxsw_sp_port,
{
struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp;
struct net_device *dev = mlxsw_sp_port->dev;
+ u16 vid, last_visited_vid, old_pvid;
enum mlxsw_reg_svfa_mt mt;
- u16 vid, vid_e;
int err;
/* In case this is invoked with BRIDGE_FLAGS_SELF and port is
@@ -398,15 +398,18 @@ static int __mlxsw_sp_port_vlans_add(struct mlxsw_sp_port
*mlxsw_sp_port,
if (err) {
netdev_err(dev, "Failed to create FID=VID=%d
mapping\n",
vid);
- return err;
+ goto err_port_vid_to_fid_set;
}
}
+ }
- /* Set FID mapping according to port's mode */
+ /* Set FID mapping according to port's mode */
+ for (vid = vid_begin; vid <= vid_end; vid++) {
err = mlxsw_sp_port_fid_map(mlxsw_sp_port, vid);
if (err) {
netdev_err(dev, "Failed to map FID=%d", vid);
- return err;
+ last_visited_vid = --vid;
+ goto err_port_fid_map;
}
}
@@ -414,7 +417,7 @@ static int __mlxsw_sp_port_vlans_add(struct mlxsw_sp_port
*mlxsw_sp_port,
true, false);
if (err) {
netdev_err(dev, "Failed to configure flooding\n");
- return err;
+ goto err_port_flood_set;
}
err = __mlxsw_sp_port_vlans_set(mlxsw_sp_port, vid_begin, vid_end,
@@ -422,26 +425,54 @@ static int __mlxsw_sp_port_vlans_add(struct mlxsw_sp_port
*mlxsw_sp_port,
if (err) {
netdev_err(dev, "Unable to add VIDs %d-%d\n", vid_begin,
vid_end);
- return err;
+ goto err_port_vlans_set;
}
- vid = vid_begin;
- if (flag_pvid && mlxsw_sp_port->pvid != vid) {
- err = mlxsw_sp_port_pvid_set(mlxsw_sp_port, vid);
+ old_pvid = mlxsw_sp_port->pvid;
+ if (flag_pvid && old_pvid != vid_begin) {
+ err = mlxsw_sp_port_pvid_set(mlxsw_sp_port, vid_begin);
if (err) {
- netdev_err(mlxsw_sp_port->dev, "Unable to add PVID
%d\n",
- vid);
- return err;
+ netdev_err(dev, "Unable to add PVID %d\n", vid_begin);
+ goto err_port_pvid_set;
}
- mlxsw_sp_port->pvid = vid;
+ mlxsw_sp_port->pvid = vid_begin;
}
/* Changing activity bits only if HW operation succeded */
for (vid = vid_begin; vid <= vid_end; vid++)
set_bit(vid, mlxsw_sp_port->active_vlans);
- return mlxsw_sp_port_stp_state_set(mlxsw_sp_port,
- mlxsw_sp_port->stp_state);
+ /* STP state change must be done after we set active VLANs */
+ err = mlxsw_sp_port_stp_state_set(mlxsw_sp_port,
+ mlxsw_sp_port->stp_state);
+ if (err) {
+ netdev_err(dev, "Failed to set STP state\n");
+ goto err_port_stp_state_set;
+ }
+
+ return 0;
+
+err_port_vid_to_fid_set:
+ mlxsw_sp_fid_destroy(mlxsw_sp, vid);
+ return err;
+
+err_port_stp_state_set:
+ for (vid = vid_begin; vid <= vid_end; vid++)
+ clear_bit(vid, mlxsw_sp_port->active_vlans);
+ if (old_pvid != mlxsw_sp_port->pvid)
+ mlxsw_sp_port_pvid_set(mlxsw_sp_port, old_pvid);
+err_port_pvid_set:
+ __mlxsw_sp_port_vlans_set(mlxsw_sp_port, vid_begin, vid_end, false,
+ false);
+err_port_vlans_set:
+ __mlxsw_sp_port_flood_set(mlxsw_sp_port, vid_begin, vid_end, false,
+ false);
+err_port_flood_set:
+ last_visited_vid = vid_end;
+err_port_fid_map:
+ for (vid = last_visited_vid; vid >= vid_begin; vid--)
+ mlxsw_sp_port_fid_unmap(mlxsw_sp_port, vid);
+ return err;
}
static int mlxsw_sp_port_vlans_add(struct mlxsw_sp_port *mlxsw_sp_port,
--
1.9.3
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
