On 12/11/15 11:09, Måns Rullgård wrote:
> On 12 November 2015 19:06:23 GMT+00:00, Mason <slash....@free.fr> wrote:
>> On 12/11/2015 18:40, Mans Rullgard wrote:
>>> Commit 77a993942 "phy/at8031: enable at8031 to work on interrupt
>> mode"
>>> added interrupt support for the 8031 PHY but left out the other two
>>> chips supported by this driver.
>>>
>>> This patch sets the .ack_interrupt and .config_intr functions for the
>>> 8030 and 8035 drivers as well.
>>>
>>> Signed-off-by: Mans Rullgard <m...@mansr.com>
>>> ---
>>> I have only tested this with an 8035. I can't find a datasheet for
>>> the 8030, but since 8031, 8032, and 8035 all have the same register
>>> layout, there's a good chance 8030 does as well.
>>> ---
>>> drivers/net/phy/at803x.c | 4 ++++
>>> 1 file changed, 4 insertions(+)
>>>
>>> diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
>>> index fabf11d..2d020a3 100644
>>> --- a/drivers/net/phy/at803x.c
>>> +++ b/drivers/net/phy/at803x.c
>>> @@ -308,6 +308,8 @@ static struct phy_driver at803x_driver[] = {
>>> .flags = PHY_HAS_INTERRUPT,
>>> .config_aneg = genphy_config_aneg,
>>> .read_status = genphy_read_status,
>>> + .ack_interrupt = at803x_ack_interrupt,
>>> + .config_intr = at803x_config_intr,
>>> .driver = {
>>> .owner = THIS_MODULE,
>>> },
>>> @@ -327,6 +329,8 @@ static struct phy_driver at803x_driver[] = {
>>> .flags = PHY_HAS_INTERRUPT,
>>> .config_aneg = genphy_config_aneg,
>>> .read_status = genphy_read_status,
>>> + .ack_interrupt = at803x_ack_interrupt,
>>> + .config_intr = at803x_config_intr,
>>> .driver = {
>>> .owner = THIS_MODULE,
>>> },
>>
>> Shouldn't we take the opportunity to clean up the duplicated register
>> definitions? (I'll send an informal patch to spur discussion.)
>>
>> Regards.
>
> That can be done independently. Feel free to send a patch.
Agreed, that deserve a separate patch.
--
Florian
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
