On Oct. Thursday 29 (44) 03:40 PM, Andrew Lunn wrote: > > Thanks for the hint, I will test this, but while reviewing the datasheet, > > the port 5 has no PHY, so must only be used as cpu port. > > Not necessarily. All that is needed is an external phy. Linux does not > care what MDIO bus that phy hangs off. It could be the same MDIO bus > as the switch, or some other MDIO bus. It is likely that port 5 is the > CPU port, but it does not have to be.
Indeed in my setup with a single 88E6352, we will soon add an external PHY there (or on port 6, doesn't matter) to make it a 6-port switch. > > I also have another patchset which fixes 2 setup registers writes and > > adds a shiny new mv88e6060.h based on mv88e6xxx.h. > > Great. I hope that will help determine if we can merge 6060 into 6xxx. Is 6060 supported by the 6352 family? It doesn't share any mv88e6xxx code... Thanks, -v -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
