No longer need explicit modprobe's and update to use ip instead of deprecated ifconfig command.
Signed-off-by: Stephen Hemminger <step...@networkplumber.org> --- a/Documentation/networking/l2tp.txt 2015-05-21 15:13:01.421115881 -0700 +++ b/Documentation/networking/l2tp.txt 2015-09-07 12:18:07.672921513 -0700 @@ -213,15 +213,12 @@ To create an L2TPv3 ethernet pseudowire and peer 192.168.1.2, using IP addresses 10.5.1.1 and 10.5.1.2 for the tunnel endpoints:- -# modprobe l2tp_eth -# modprobe l2tp_netlink - # ip l2tp add tunnel tunnel_id 1 peer_tunnel_id 1 udp_sport 5000 \ udp_dport 5000 encap udp local 192.168.1.1 remote 192.168.1.2 # ip l2tp add session tunnel_id 1 session_id 1 peer_session_id 1 -# ifconfig -a +# ip -s -d show dev l2tpeth0 # ip addr add 10.5.1.2/32 peer 10.5.1.1/32 dev l2tpeth0 -# ifconfig l2tpeth0 up +# ip li set dev l2tpeth0 up Choose IP addresses to be the address of a local IP interface and that of the remote system. The IP addresses of the l2tpeth0 interface can be -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
