On Fri, 2015-09-04 at 09:55 +0200, Sébastien Bocahu wrote: > Hi, > > Any chance this behaviour gets fixed, with either a new firmware or a > workaround in the kernel ? >
As I said earlier, when we call bnx2_shutdown_chip(), we inform the firmware that the driver is shutting down. The firmware should know that there is IPMI firmware and the link needs to stay up. In the older driver, we would also call bnx2_set_power_state() which would send some additional messages to the firmware before putting the device in D3hot. May be these messages are required by the firmware to keep the link up. Harish, please check with your firmware team. Thanks. -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html