Since only a few of the dwmac-* drivers actually need to use
the OF match move handling into the dwmac-* drivers that need
it. This will also allow dwmac-* drivers to use their own
custom match data structure.
Signed-off-by: Joachim Eastwood <manab...@gmail.com>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c | 8 ++++++++
drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c | 10 ++++++++++
drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 18 ------------------
3 files changed, 18 insertions(+), 18 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
index 21193a73acfc..65c1e1afe6a8 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
@@ -580,8 +580,15 @@ static int rk_gmac_probe(struct platform_device *pdev)
{
struct plat_stmmacenet_data *plat_dat;
struct stmmac_resources stmmac_res;
+ const struct stmmac_of_data *data;
int ret;
+ data = of_device_get_match_data(&pdev->dev);
+ if (!data) {
+ dev_err(&pdev->dev, "no of match data provided\n");
+ return -EINVAL;
+ }
+
ret = stmmac_get_platform_resources(pdev, &stmmac_res);
if (ret)
return ret;
@@ -591,6 +598,7 @@ static int rk_gmac_probe(struct platform_device *pdev)
return PTR_ERR(plat_dat);
plat_dat->has_gmac = true;
+ plat_dat->setup = data->setup;
plat_dat->init = rk_gmac_init;
plat_dat->exit = rk_gmac_exit;
plat_dat->fix_mac_speed = rk_fix_speed;
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c
b/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c
index b17238aac791..8a977fde1a46 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c
@@ -21,6 +21,7 @@
#include <linux/regmap.h>
#include <linux/clk.h>
#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/of_net.h>
#include "stmmac_platform.h"
@@ -337,10 +338,17 @@ static int sti_dwmac_parse_data(struct sti_dwmac *dwmac,
static int sti_dwmac_probe(struct platform_device *pdev)
{
struct plat_stmmacenet_data *plat_dat;
+ const struct stmmac_of_data *data;
struct stmmac_resources stmmac_res;
struct sti_dwmac *dwmac;
int ret;
+ data = of_device_get_match_data(&pdev->dev);
+ if (!data) {
+ dev_err(&pdev->dev, "No OF match data provided\n");
+ return -EINVAL;
+ }
+
ret = stmmac_get_platform_resources(pdev, &stmmac_res);
if (ret)
return ret;
@@ -360,7 +368,9 @@ static int sti_dwmac_probe(struct platform_device *pdev)
}
plat_dat->bsp_priv = dwmac;
+ plat_dat->init = data->init;
plat_dat->exit = sti_dwmac_exit;
+ plat_dat->fix_mac_speed = data->fix_mac_speed;
ret = plat_dat->init(pdev, plat_dat->bsp_priv);
if (ret)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 9c49d95e529a..55e569b330b2 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -109,30 +109,12 @@ stmmac_probe_config_dt(struct platform_device *pdev,
const char **mac)
{
struct device_node *np = pdev->dev.of_node;
struct plat_stmmacenet_data *plat;
- const struct stmmac_of_data *data;
struct stmmac_dma_cfg *dma_cfg;
plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL);
if (!plat)
return ERR_PTR(-ENOMEM);
- data = of_device_get_match_data(&pdev->dev);
- if (data) {
- plat->has_gmac = data->has_gmac;
- plat->enh_desc = data->enh_desc;
- plat->tx_coe = data->tx_coe;
- plat->rx_coe = data->rx_coe;
- plat->bugged_jumbo = data->bugged_jumbo;
- plat->pmt = data->pmt;
- plat->riwt_off = data->riwt_off;
- plat->fix_mac_speed = data->fix_mac_speed;
- plat->bus_setup = data->bus_setup;
- plat->setup = data->setup;
- plat->free = data->free;
- plat->init = data->init;
- plat->exit = data->exit;
- }
-
*mac = of_get_mac_address(np);
plat->interface = of_get_phy_mode(np);
--
1.8.0
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
