Removes superh board specific configuration from the header file. These boards will instead be configured using platform data.
Signed-off-by: Magnus Damm <[EMAIL PROTECTED]> --- drivers/net/smc91x.h | 30 ------------------------------ 1 file changed, 30 deletions(-) --- 0018/drivers/net/smc91x.h +++ work/drivers/net/smc91x.h 2008-02-20 17:09:28.000000000 +0900 @@ -292,36 +292,6 @@ SMC_outw(u16 val, void __iomem *ioaddr, #define SMC_insw(a, r, p, l) insw((a) + (r), p, l) #define SMC_outsw(a, r, p, l) outsw((a) + (r), p, l) -#elif defined(CONFIG_SUPERH) - -#ifdef CONFIG_SOLUTION_ENGINE -#define SMC_IRQ_FLAGS (0) -#define SMC_CAN_USE_8BIT 0 -#define SMC_CAN_USE_16BIT 1 -#define SMC_CAN_USE_32BIT 0 -#define SMC_IO_SHIFT 0 -#define SMC_NOWAIT 1 - -#define SMC_inw(a, r) inw((a) + (r)) -#define SMC_outw(v, a, r) outw(v, (a) + (r)) -#define SMC_insw(a, r, p, l) insw((a) + (r), p, l) -#define SMC_outsw(a, r, p, l) outsw((a) + (r), p, l) - -#else /* BOARDS */ - -#define SMC_CAN_USE_8BIT 1 -#define SMC_CAN_USE_16BIT 1 -#define SMC_CAN_USE_32BIT 0 - -#define SMC_inb(a, r) inb((a) + (r)) -#define SMC_inw(a, r) inw((a) + (r)) -#define SMC_outb(v, a, r) outb(v, (a) + (r)) -#define SMC_outw(v, a, r) outw(v, (a) + (r)) -#define SMC_insw(a, r, p, l) insw((a) + (r), p, l) -#define SMC_outsw(a, r, p, l) outsw((a) + (r), p, l) - -#endif /* BOARDS */ - #elif defined(CONFIG_M32R) #define SMC_CAN_USE_8BIT 0 -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
