[PATCH 3/3] [POWERPC] MPC8349E-mITX: Vitesse 7385 PHY is not connected to the MDIO bus

[Vitaly Bordug]

...thus use fixed-link to register proper "Fixed PHY"

Signed-off-by: Anton Vorontsov <[EMAIL PROTECTED]>
Signed-off-by: Vitaly Bordug <[EMAIL PROTECTED]>

---

 arch/powerpc/boot/dts/mpc8349emitx.dts |   11 ++---------
 1 files changed, 2 insertions(+), 9 deletions(-)


diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts 
b/arch/powerpc/boot/dts/mpc8349emitx.dts
index 5072f6d..e2d00f1 100644
--- a/arch/powerpc/boot/dts/mpc8349emitx.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitx.dts
@@ -115,14 +115,6 @@
                                reg = <1c>;
                                device_type = "ethernet-phy";
                        };
-
-                       /* Vitesse 7385 */
-                       phy1f: [EMAIL PROTECTED] {
-                               interrupt-parent = < &ipic >;
-                               interrupts = <12 8>;
-                               reg = <1f>;
-                               device_type = "ethernet-phy";
-                       };
                };
 
                [EMAIL PROTECTED] {
@@ -159,7 +151,8 @@
                        local-mac-address = [ 00 00 00 00 00 00 ];
                        interrupts = <23 8 24 8 25 8>;
                        interrupt-parent = < &ipic >;
-                       phy-handle = < &phy1f >;
+                       /* Vitesse 7385 isn't on the MDIO bus */
+                       fixed-link = <1 1 d#1000>;
                        linux,network-index = <1>;
                };
 

-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html