On Wed, 15 Aug 2007 21:20:37 +0000 (UTC) Sébastien Judenherc <[EMAIL PROTECTED]> wrote:
> Hello, > I can see some very strange problem with sky2 and skge interfaces with 2.6.22, > and also 2.6.23-rc2/3. > After 8-9 minutes, the interfaces stop working. ethtool reports that the link > is > down and the only way to make the interfaces usable again is > removing/reinserting the module or running ethtool -r. > This occurs for both sky2 and skge for two PCs connected to a gigabit switch. > The other PCs on the same switch continue to work fine (most are 100Mbit/s). > It > also occurs on a third PC with skge, directly connected to a 100Mbit/s > interface > over a cross over cable. I didn't notice the problem with 2.6.19. > Looks like some noise sensitivity in the PHY. Could you try the vendor sk98lin driver, although all drivers use the same phy settings. - To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
