Yes those functions are large enough to be de-inlined. I would like to
shrink those to functions, by replacing the switch blocks with a simple
macros, since the mask registers are contiguous.
Will repost a patch based on your patch, after a bit of testing.
Thanks,
-Dhananjay
Stephen Hemminger wrote:
> Get rid of dubious casts to (void *) which causes a sparse warning.
> And move largeish function from inline to the one file that uses the code,
> the compiler can then decide to inline it.
>
> Compile tested only.
>
> Signed-off-by: Stephen Hemminger <[EMAIL PROTECTED]>
>
> ---
> drivers/net/netxen/netxen_nic.h | 103
> -----------------------------------
> drivers/net/netxen/netxen_nic_main.c | 97 ++++++++++++++++++++++++++++++++
> 2 files changed, 97 insertions(+), 103 deletions(-)
>
> --- a/drivers/net/netxen/netxen_nic.h 2007-07-05 14:21:36.000000000 -0700
> +++ b/drivers/net/netxen/netxen_nic.h 2007-07-05 16:09:01.000000000 -0700
> @@ -1097,109 +1097,6 @@ int netxen_nic_change_mtu(struct net_dev
> int netxen_nic_set_mac(struct net_device *netdev, void *p);
> struct net_device_stats *netxen_nic_get_stats(struct net_device *netdev);
>
> -static inline void netxen_nic_disable_int(struct netxen_adapter *adapter)
> -{
> - uint32_t mask = 0x7ff;
> - int retries = 32;
> -
> - DPRINTK(1, INFO, "Entered ISR Disable \n");
> -
> - switch (adapter->portnum) {
> - case 0:
> - writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_0));
> - break;
> - case 1:
> - writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_1));
> - break;
> - case 2:
> - writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_2));
> - break;
> - case 3:
> - writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_3));
> - break;
> - }
> -
> - if (adapter->intr_scheme != -1 &&
> - adapter->intr_scheme != INTR_SCHEME_PERPORT) {
> - writel(mask,
> - (void *)(PCI_OFFSET_SECOND_RANGE(adapter,
> ISR_INT_MASK)));
> - }
> -
> - /* Window = 0 or 1 */
> - if (!(adapter->flags & NETXEN_NIC_MSI_ENABLED)) {
> - do {
> - writel(0xffffffff, (void *)
> - (PCI_OFFSET_SECOND_RANGE(adapter,
> ISR_INT_TARGET_STATUS)));
> - mask = readl((void *)
> - (pci_base_offset(adapter,
> ISR_INT_VECTOR)));
> - if (!(mask & 0x80))
> - break;
> - udelay(10);
> - } while (--retries);
> -
> - if (!retries) {
> - printk(KERN_NOTICE "%s: Failed to disable interrupt
> completely\n",
> - netxen_nic_driver_name);
> - }
> - }
> -
> - DPRINTK(1, INFO, "Done with Disable Int\n");
> -
> - return;
> -}
> -
> -static inline void netxen_nic_enable_int(struct netxen_adapter *adapter)
> -{
> - u32 mask;
> -
> - DPRINTK(1, INFO, "Entered ISR Enable \n");
> -
> - if (adapter->intr_scheme != -1 &&
> - adapter->intr_scheme != INTR_SCHEME_PERPORT) {
> - switch (adapter->ahw.board_type) {
> - case NETXEN_NIC_GBE:
> - mask = 0x77b;
> - break;
> - case NETXEN_NIC_XGBE:
> - mask = 0x77f;
> - break;
> - default:
> - mask = 0x7ff;
> - break;
> - }
> -
> - writel(mask,
> - (void *)(PCI_OFFSET_SECOND_RANGE(adapter,
> ISR_INT_MASK)));
> - }
> - switch (adapter->portnum) {
> - case 0:
> - writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_0));
> - break;
> - case 1:
> - writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_1));
> - break;
> - case 2:
> - writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_2));
> - break;
> - case 3:
> - writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_3));
> - break;
> - }
> -
> - if (!(adapter->flags & NETXEN_NIC_MSI_ENABLED)) {
> - mask = 0xbff;
> - if (adapter->intr_scheme != -1 &&
> - adapter->intr_scheme != INTR_SCHEME_PERPORT) {
> - writel(0X0, NETXEN_CRB_NORMALIZE(adapter,
> CRB_INT_VECTOR));
> - }
> - writel(mask,
> - (void *)(PCI_OFFSET_SECOND_RANGE(adapter,
> ISR_INT_TARGET_MASK)));
> - }
> -
> - DPRINTK(1, INFO, "Done with enable Int\n");
> -
> - return;
> -}
>
> /*
> * NetXen Board information
> --- a/drivers/net/netxen/netxen_nic_main.c 2007-07-05 15:17:32.000000000
> -0700
> +++ b/drivers/net/netxen/netxen_nic_main.c 2007-07-05 16:09:59.000000000
> -0700
> @@ -156,6 +156,103 @@ static inline void netxen_nic_update_cmd
> #define ADAPTER_LIST_SIZE 12
> int netxen_cards_found;
>
> +static void netxen_nic_disable_int(struct netxen_adapter *adapter)
> +{
> + uint32_t mask = 0x7ff;
> + int retries = 32;
> +
> + DPRINTK(1, INFO, "Entered ISR Disable \n");
> +
> + switch (adapter->portnum) {
> + case 0:
> + writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_0));
> + break;
> + case 1:
> + writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_1));
> + break;
> + case 2:
> + writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_2));
> + break;
> + case 3:
> + writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_3));
> + break;
> + }
> +
> + if (adapter->intr_scheme != -1 &&
> + adapter->intr_scheme != INTR_SCHEME_PERPORT)
> + writel(mask,PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_MASK));
> +
> + /* Window = 0 or 1 */
> + if (!(adapter->flags & NETXEN_NIC_MSI_ENABLED)) {
> + do {
> + writel(0xffffffff,
> + PCI_OFFSET_SECOND_RANGE(adapter,
> ISR_INT_TARGET_STATUS));
> + mask = readl(pci_base_offset(adapter, ISR_INT_VECTOR));
> + if (!(mask & 0x80))
> + break;
> + udelay(10);
> + } while (--retries);
> +
> + if (!retries) {
> + printk(KERN_NOTICE "%s: Failed to disable interrupt
> completely\n",
> + netxen_nic_driver_name);
> + }
> + }
> +
> + DPRINTK(1, INFO, "Done with Disable Int\n");
> +}
> +
> +static void netxen_nic_enable_int(struct netxen_adapter *adapter)
> +{
> + u32 mask;
> +
> + DPRINTK(1, INFO, "Entered ISR Enable \n");
> +
> + if (adapter->intr_scheme != -1 &&
> + adapter->intr_scheme != INTR_SCHEME_PERPORT) {
> + switch (adapter->ahw.board_type) {
> + case NETXEN_NIC_GBE:
> + mask = 0x77b;
> + break;
> + case NETXEN_NIC_XGBE:
> + mask = 0x77f;
> + break;
> + default:
> + mask = 0x7ff;
> + break;
> + }
> +
> + writel(mask, PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_MASK));
> + }
> +
> + switch (adapter->portnum) {
> + case 0:
> + writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_0));
> + break;
> + case 1:
> + writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_1));
> + break;
> + case 2:
> + writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_2));
> + break;
> + case 3:
> + writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_3));
> + break;
> + }
> +
> + if (!(adapter->flags & NETXEN_NIC_MSI_ENABLED)) {
> + mask = 0xbff;
> + if (adapter->intr_scheme != -1 &&
> + adapter->intr_scheme != INTR_SCHEME_PERPORT) {
> + writel(0X0, NETXEN_CRB_NORMALIZE(adapter,
> CRB_INT_VECTOR));
> + }
> + writel(mask,
> + PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_TARGET_MASK));
> + }
> +
> + DPRINTK(1, INFO, "Done with enable Int\n");
> +}
> +
> /*
> * netxen_nic_probe()
> *
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
