On Tue, Apr 13, 2021 at 04:24:43PM +0300, Ioana Ciornei wrote: > From: Ioana Ciornei <ioana.cior...@nxp.com> > > This patch set adds tc hardware offload on ingress traffic in > dpaa2-switch. The cls flower and matchall classifiers are supported > using the same ACL infrastructure supported by the dpaa2-switch. > > The first patch creates a new structure to hold all the necessary > information related to an ACL table. This structure is used in the next > patches to create a link between each switch port and the table used. > Multiple ports can share the same ACL table when they also share the > ingress tc block. Also, some small changes in the priority of the > default STP trap is done in the second patch. > > The support for cls flower is added in the 3rd patch, while the 4th > one builds on top of the infrastructure put in place and adds cls > matchall support. > > The following flow keys are supported: > - Ethernet: dst_mac/src_mac > - IPv4: dst_ip/src_ip/ip_proto/tos > - VLAN: vlan_id/vlan_prio/vlan_tpid/vlan_dei > - L4: dst_port/src_port > > Each filter can support only one action from the following list: > - drop > - mirred egress redirect > - trap > > With the last patch, we reuse the dpaa2_switch_acl_entry_add() function > added previously instead of open-coding the install of a new ACL entry > into the table. > > Ioana Ciornei (5): > dpaa2-switch: create a central dpaa2_switch_acl_tbl structure > dpaa2-switch: install default STP trap rule with the highest priority > dpaa2-switch: add tc flower hardware offload on ingress traffic > dpaa2-switch: add tc matchall filter support > dpaa2-switch: reuse dpaa2_switch_acl_entry_add() for STP frames trap >
This patch set is in the 'Accepted' state in patchwork but is nowhere to be found in the net-next tree. Should I do something else or it was just not pushed yet? Ioana
