This patch adds EEE support.

Signed-off-by: René van Dorst <opensou...@vdorst.com>
---
 drivers/net/dsa/mt7530.c | 50 ++++++++++++++++++++++++++++++++++++++++
 drivers/net/dsa/mt7530.h | 16 ++++++++++++-
 2 files changed, 65 insertions(+), 1 deletion(-)

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 2bd1bab71497..daa87b0baa65 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -2568,6 +2568,11 @@ static void mt753x_phylink_mac_link_up(struct dsa_switch 
*ds, int port,
                        mcr |= PMCR_TX_FC_EN;
                if (rx_pause)
                        mcr |= PMCR_RX_FC_EN;
+
+               if (mode == MLO_AN_PHY && phydev &&
+                   !(priv->eee_disabled & BIT(port)) &&
+                   phy_init_eee(phydev, 0) >= 0)
+                       mcr |= PMCR_FORCE_EEE1G | PMCR_FORCE_EEE100;
        }
 
        mt7530_set(priv, MT7530_PMCR_P(port), mcr);
@@ -2800,6 +2805,49 @@ mt753x_phy_write(struct dsa_switch *ds, int port, int 
regnum, u16 val)
        return priv->info->phy_write(ds, port, regnum, val);
 }
 
+static int mt753x_get_mac_eee(struct dsa_switch *ds, int port,
+                             struct ethtool_eee *e)
+{
+       struct mt7530_priv *priv = ds->priv;
+       u32 eeecr, pmsr;
+
+       e->eee_enabled = !(priv->eee_disabled & BIT(port));
+
+       if (e->eee_enabled) {
+               eeecr = mt7530_read(priv, MT7530_PMEEECR_P(port));
+               e->tx_lpi_enabled = !(eeecr & LPI_MODE_EN);
+               e->tx_lpi_timer = GET_LPI_THRESH(eeecr);
+               pmsr = mt7530_read(priv, MT7530_PMSR_P(port));
+               e->eee_active = e->eee_enabled && !!(pmsr & PMSR_EEE1G);
+       }
+
+       return 0;
+}
+
+static int mt753x_set_mac_eee(struct dsa_switch *ds, int port,
+                             struct ethtool_eee *e)
+{
+       struct mt7530_priv *priv = ds->priv;
+       u32 eeecr;
+
+       if (e->eee_enabled) {
+               if (e->tx_lpi_timer > 0xFFF)
+                       return -EINVAL;
+               priv->eee_disabled &= ~BIT(port);
+               eeecr = mt7530_read(priv, MT7530_PMEEECR_P(port));
+               eeecr &= ~(LPI_THRESH_MASK | LPI_MODE_EN);
+               if (!e->tx_lpi_enabled)
+                       /* Force LPI Mode without a delay */
+                       eeecr |= LPI_MODE_EN;
+               eeecr |= SET_LPI_THRESH(e->tx_lpi_timer);
+               mt7530_write(priv, MT7530_PMEEECR_P(port), eeecr);
+       } else {
+               priv->eee_disabled |= BIT(port);
+       }
+
+       return 0;
+}
+
 static const struct dsa_switch_ops mt7530_switch_ops = {
        .get_tag_protocol       = mtk_get_tag_protocol,
        .setup                  = mt753x_setup,
@@ -2835,6 +2883,8 @@ static const struct dsa_switch_ops mt7530_switch_ops = {
        .phylink_mac_an_restart = mt753x_phylink_mac_an_restart,
        .phylink_mac_link_down  = mt753x_phylink_mac_link_down,
        .phylink_mac_link_up    = mt753x_phylink_mac_link_up,
+       .get_mac_eee            = mt753x_get_mac_eee,
+       .set_mac_eee            = mt753x_set_mac_eee,
 };
 
 static const struct mt753x_info mt753x_table[] = {
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index ec36ea5dfd57..02f983df26bc 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -257,6 +257,8 @@ enum mt7530_vlan_port_attr {
 #define  PMCR_RX_EN                    BIT(13)
 #define  PMCR_BACKOFF_EN               BIT(9)
 #define  PMCR_BACKPR_EN                        BIT(8)
+#define  PMCR_FORCE_EEE1G              BIT(7)
+#define  PMCR_FORCE_EEE100             BIT(6)
 #define  PMCR_TX_FC_EN                 BIT(5)
 #define  PMCR_RX_FC_EN                 BIT(4)
 #define  PMCR_FORCE_SPEED_1000         BIT(3)
@@ -288,7 +290,17 @@ enum mt7530_vlan_port_attr {
                                         PMCR_TX_EN | PMCR_RX_EN | \
                                         PMCR_TX_FC_EN | PMCR_RX_FC_EN | \
                                         PMCR_FORCE_SPEED_1000 | \
-                                        PMCR_FORCE_FDX | PMCR_FORCE_LNK)
+                                        PMCR_FORCE_FDX | PMCR_FORCE_LNK | \
+                                        PMCR_FORCE_EEE1G | PMCR_FORCE_EEE100)
+
+#define MT7530_PMEEECR_P(x)            (0x3004 + (x) * 0x100)
+#define  WAKEUP_TIME_1000(x)           (((x) & 0xFF) << 24)
+#define  WAKEUP_TIME_100(x)            (((x) & 0xFF) << 16)
+#define  LPI_THRESH_MASK               GENMASK(15, 4)
+#define  LPI_THRESH_SHT                        4
+#define  SET_LPI_THRESH(x)             (((x) << LPI_THRESH_SHT) & 
LPI_THRESH_MASK)
+#define  GET_LPI_THRESH(x)             (((x) & LPI_THRESH_MASK) >> 
LPI_THRESH_SHT)
+#define  LPI_MODE_EN                   BIT(0)
 
 #define MT7530_PMSR_P(x)               (0x3008 + (x) * 0x100)
 #define  PMSR_EEE1G                    BIT(7)
@@ -761,6 +773,7 @@ struct mt753x_info {
  *                     registers
  * @p6_interface       Holding the current port 6 interface
  * @p5_intf_sel:       Holding the current port 5 interface select
+ * @eee_disabled:      Holding the current eee user disabled bits
  */
 struct mt7530_priv {
        struct device           *dev;
@@ -778,6 +791,7 @@ struct mt7530_priv {
        unsigned int            p5_intf_sel;
        u8                      mirror_rx;
        u8                      mirror_tx;
+       u8                      eee_disabled;
 
        struct mt7530_port      ports[MT7530_NUM_PORTS];
        /* protect among processes for registers access*/
-- 
2.30.2

Reply via email to