> -----Original Message----- > From: Heiner Kallweit <hkallwe...@gmail.com> > Sent: 2021年4月7日 23:53 > To: Andrew Lunn <and...@lunn.ch>; Russell King - ARM Linux > <li...@armlinux.org.uk>; Jakub Kicinski <k...@kernel.org>; David Miller > <da...@davemloft.net>; Fugang Duan <fugang.d...@nxp.com> > Cc: netdev@vger.kernel.org; Joakim Zhang <qiangqing.zh...@nxp.com> > Subject: [PATCH net-next 2/3] net: fec: use mac-managed PHY PM > > Use the new mac_managed_pm flag to work around an issue with KSZ8081 > PHY that becomes unstable when a soft reset is triggered during aneg. > > Reported-by: Joakim Zhang <qiangqing.zh...@nxp.com> > Tested-by: Joakim Zhang <qiangqing.zh...@nxp.com> > Signed-off-by: Heiner Kallweit <hkallwe...@gmail.com> > --- > drivers/net/ethernet/freescale/fec_main.c | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/drivers/net/ethernet/freescale/fec_main.c > b/drivers/net/ethernet/freescale/fec_main.c > index 3db882322..70aea9c27 100644 > --- a/drivers/net/ethernet/freescale/fec_main.c > +++ b/drivers/net/ethernet/freescale/fec_main.c > @@ -2048,6 +2048,8 @@ static int fec_enet_mii_probe(struct net_device > *ndev) > fep->link = 0; > fep->full_duplex = 0; > > + phy_dev->mac_managed_pm = 1; > + > phy_attached_info(phy_dev); > > return 0; > @@ -3864,6 +3866,7 @@ static int __maybe_unused fec_resume(struct > device *dev) > netif_device_attach(ndev); > netif_tx_unlock_bh(ndev); > napi_enable(&fep->napi); > + phy_init_hw(ndev->phydev);
For now, I think we doesn't need to re-initialize PHY after MAC resume back, it also can be done by PHY driver if it needed. Best Regards, Joakim Zhang > phy_start(ndev->phydev); > } > rtnl_unlock(); > -- > 2.31.1 >
