I somehow missed this mail..
On Mon, Apr 05, 2021 at 10:12:36PM +0100, Russell King - ARM Linux admin wrote:
> On Mon, Apr 05, 2021 at 08:58:07PM +0200, Danilo Krummrich wrote:
> > On Mon, Apr 05, 2021 at 03:33:55PM +0200, Andrew Lunn wrote:
> > However, this was about something else - Russell wrote:
> > > > > We have established that MDIO drivers need to reject accesses for
> > > > > reads/writes that they do not support [..]
> > The MDIO drivers do this by checking the MII_ADDR_C45 flag if it's a C45 bus
> > request. In case they don't support it they return -EOPNOTSUPP. So
> > basically,
> > the bus drivers read/write functions (should) encode the capability of doing
> > C45 transfers.
> >
> > I just noted that this is redundant to the bus' capabilities field of
> > struct mii_bus which also encodes the bus' capabilities of doing C22 and/or
> > C45
> > transfers.
> >
> > Now, instead of encoding this information of the bus' capabilities at both
> > places, I'd propose just checking the mii_bus->capabilities field in the
> > mdiobus_c45_*() functions. IMHO this would be a little cleaner, than having
> > two
> > places where this information is stored. What do you think about that?
>
> It would be good to clean that up, but that's a lot of work given the
> number of drivers - not only in terms of making the changes but also
> making sure that the changes are as correct as would be sensibly
> achievable... then there's the problem of causing regressions by doing
> so.
>
As mentioned in the answer to Andrew, I think it wouldn't be too many as we'd
only need to look for the ones considering MII_ADDR_C45 at all.
> The two ways were introduced at different times to do two different
> things: the checking in the read/write methods in each driver was the
> first method, which was being added to newer drivers. Then more
> recently came the ->capabilities field.
>
> So now we have some drivers that:
> - do no checks and don't fill in ->capabilities either (some of which
> are likely C22-only.)
Guess they could be left untouched completely and simply go for MDIOBUS_NO_CAP
implicitly and therefore C45 requests would be correctly rejected by
mdiobus_c45_*() functions. I think this would be the main advantage apart from
making it more clean.
> - check in their read/write methods for access types they don't support
> (e.g. drivers/net/ethernet/marvell/mvmdio.c) and don't fill in
> ->capabilities. Note, mvmdio supports both C22-only and C45-only
> interfaces with no C22-and-C45 interfaces.
Yes, I think the correct capability could still be easily assigned per instance
within the probe() function:
switch (type) {
case BUS_TYPE_SMI:
bus->capabilities = MDIOBUS_C22;
[...]
break;
case BUS_TYPE_XSMI:
bus->capabilities = MDIOBUS_C45;
[...]
break;
}
> - do fill in ->capabilities with MDIOBUS_C22_C45 (and hence have no
> checks in their read/write functions).
>
Nothing to be done for them.
> Sometimes, its best to leave stuff alone... if it ain't broke, don't
> make regressions.
>
Yes, I can perfectly understand that.
However, maybe I go for a patch anyways, and if so I will also send it. If it's
taken by you in the end is on another piece of paper.
Thanks again!
Danilo
> --
> RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
> FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
