88E2111 is a variant of 88E2110 which does not support 5 gigabit speeds.
Differentiate these variants via the match_phy_device() method, since
they have the same PHY ID.
Signed-off-by: Marek Behún <ka...@kernel.org>
---
drivers/net/phy/marvell10g.c | 59 ++++++++++++++++++++++++++++++++++++
1 file changed, 59 insertions(+)
diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index 51b7a5083bdf..6269b9041180 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -934,6 +934,46 @@ static const struct mv3310_chip mv2110_type = {
#endif
};
+static const struct mv3310_chip mv2111_type = {
+ .supported_interfaces =
+ INITIALIZE_BITMAP(PHY_INTERFACE_MODE_MAX,
+ PHY_INTERFACE_MODE_SGMII,
+ PHY_INTERFACE_MODE_2500BASEX,
+ PHY_INTERFACE_MODE_10GBASER,
+ PHY_INTERFACE_MODE_USXGMII),
+ .get_mactype = mv2110_get_mactype,
+ .init_interface = mv2110_init_interface,
+
+#ifdef CONFIG_HWMON
+ .hwmon_read_temp_reg = mv2110_hwmon_read_temp_reg,
+#endif
+};
+
+static int mv211x_match_phy_device(struct phy_device *phydev, bool has_5g)
+{
+ int val;
+
+ if ((phydev->c45_ids.device_ids[MDIO_MMD_PMAPMD] &
+ MARVELL_PHY_ID_MASK) != MARVELL_PHY_ID_88E2110)
+ return 0;
+
+ val = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_SPEED);
+ if (val < 0)
+ return val;
+
+ return !!(val & MDIO_PCS_SPEED_5G) == has_5g;
+}
+
+static int mv2110_match_phy_device(struct phy_device *phydev)
+{
+ return mv211x_match_phy_device(phydev, true);
+}
+
+static int mv2111_match_phy_device(struct phy_device *phydev)
+{
+ return mv211x_match_phy_device(phydev, false);
+}
+
static struct phy_driver mv3310_drivers[] = {
{
.phy_id = MARVELL_PHY_ID_88X3310,
@@ -974,6 +1014,7 @@ static struct phy_driver mv3310_drivers[] = {
{
.phy_id = MARVELL_PHY_ID_88E2110,
.phy_id_mask = MARVELL_PHY_ID_MASK,
+ .match_phy_device = mv2110_match_phy_device,
.name = "mv88e2110",
.driver_data = &mv2110_type,
.probe = mv3310_probe,
@@ -988,6 +1029,24 @@ static struct phy_driver mv3310_drivers[] = {
.remove = mv3310_remove,
.set_loopback = genphy_c45_loopback,
},
+ {
+ .phy_id = MARVELL_PHY_ID_88E2110,
+ .phy_id_mask = MARVELL_PHY_ID_MASK,
+ .match_phy_device = mv2111_match_phy_device,
+ .name = "mv88e2111",
+ .driver_data = &mv2111_type,
+ .probe = mv3310_probe,
+ .suspend = mv3310_suspend,
+ .resume = mv3310_resume,
+ .config_init = mv3310_config_init,
+ .config_aneg = mv3310_config_aneg,
+ .aneg_done = mv3310_aneg_done,
+ .read_status = mv3310_read_status,
+ .get_tunable = mv3310_get_tunable,
+ .set_tunable = mv3310_set_tunable,
+ .remove = mv3310_remove,
+ .set_loopback = genphy_c45_loopback,
+ },
};
module_phy_driver(mv3310_drivers);
--
2.26.2
