Here are some updates for marvell10g PHY driver. I am still working on some more changes for this driver, but I would like to have at least something reviewed / applied.
Changes since v2: - code refactored to use an additional structure mv3310_chip describing mv3310 specific properties / operations for PHYs supported by this driver - added separate phy_driver structures for 88X3340 and 88E2111 - removed 88E2180 specific code (dual-port and quad-port SXGMII modes are ignored for now) Changes since v1: - added various MACTYPEs support also for 88E21XX - differentiate between specific models with same PHY_ID - better check for compatible interface - print exact model Marek Behún (18): net: phy: marvell10g: rename register net: phy: marvell10g: fix typo net: phy: marvell10g: allow 5gbase-r and usxgmii net: phy: marvell10g: indicate 88X33x0 only port control registers net: phy: marvell10g: add all MACTYPE definitions for 88X33x0 net: phy: marvell10g: add MACTYPE definitions for 88E21xx net: phy: marvell10g: support all rate matching modes include: add library helpers for variadic macro expansion include: bitmap: add macro for bitmap initialization net: phy: marvell10g: check for correct supported interface mode net: phy: marvell10g: store temperature read method in chip strucutre net: phy: marvell10g: support other MACTYPEs net: phy: marvell10g: add separate structure for 88X3340 net: phy: marvell10g: fix driver name for mv88e2110 net: phy: add constants for 2.5G and 5G speed in PCS speed register net: phy: marvell10g: differentiate 88E2110 vs 88E2111 net: phy: marvell10g: change module description MAINTAINERS: add myself as maintainer of marvell10g driver MAINTAINERS | 1 + drivers/net/phy/marvell10g.c | 369 +++++++++++++++++++++++++++------ include/linux/bitmap.h | 24 +++ include/linux/marvell_phy.h | 6 +- include/linux/variadic-macro.h | 221 ++++++++++++++++++++ include/uapi/linux/mdio.h | 2 + 6 files changed, 562 insertions(+), 61 deletions(-) create mode 100644 include/linux/variadic-macro.h -- 2.26.2
