From: Arkadiusz Kubalewski <arkadiusz.kubalew...@intel.com>
Setup TC before the i40e_setup_pf_switch() call.
Memory must be initialized for all the queues
before using its resources.
Previously it could be possible that a call:
xdp_rxq_info_reg(&rx_ring->xdp_rxq, rx_ring->netdev,
rx_ring->queue_index, rx_ring->q_vector->napi.napi_id);
was made with q_vector being null.
Oops could show up with the following sequence:
- no driver loaded
- FW LLDP agent is on (flag disable-fw-lldp:off)
- link is up
- DCB configured with number of Traffic Classes that will not divide
completely the default number of queues (usually cpu cores)
- driver load
- set private flag: disable-fw-lldp:on
Fixes: 4b208eaa8078 ("i40e: Add init and default config of software based DCB")
Fixes: b02e5a0ebb17 ("xsk: Propagate napi_id to XDP socket Rx path")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktio...@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalew...@intel.com>
Tested-by: Tony Brelinski <tonyx.brelin...@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.ngu...@intel.com>
---
drivers/net/ethernet/intel/i40e/i40e_main.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c
b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 17f3b800640e..f67f0cc9dadf 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -10573,12 +10573,6 @@ static void i40e_rebuild(struct i40e_pf *pf, bool
reinit, bool lock_acquired)
goto end_core_reset;
}
- if (!lock_acquired)
- rtnl_lock();
- ret = i40e_setup_pf_switch(pf, reinit);
- if (ret)
- goto end_unlock;
-
#ifdef CONFIG_I40E_DCB
/* Enable FW to write a default DCB config on link-up
* unless I40E_FLAG_TC_MQPRIO was enabled or DCB
@@ -10607,6 +10601,11 @@ static void i40e_rebuild(struct i40e_pf *pf, bool
reinit, bool lock_acquired)
}
#endif /* CONFIG_I40E_DCB */
+ if (!lock_acquired)
+ rtnl_lock();
+ ret = i40e_setup_pf_switch(pf, reinit);
+ if (ret)
+ goto end_unlock;
/* The driver only wants link up/down and module qualification
* reports from firmware. Note the negative logic.
--
2.26.2
