[PATCH v2 2/5] net: pch_gbe: Convert to use GPIO descriptors

[Andy Shevchenko]

This switches the PCH GBE driver to use GPIO descriptors.

Signed-off-by: Andy Shevchenko <andriy.shevche...@linux.intel.com>
---
 .../ethernet/oki-semi/pch_gbe/pch_gbe_main.c  | 45 +++++++++++++------
 1 file changed, 32 insertions(+), 13 deletions(-)

diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c 
b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
index 1b32a43f7024..1038947cbac8 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
@@ -8,10 +8,12 @@
 
 #include "pch_gbe.h"
 #include "pch_gbe_phy.h"
+
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/machine.h>
 #include <linux/module.h>
 #include <linux/net_tstamp.h>
 #include <linux/ptp_classify.h>
-#include <linux/gpio.h>
 
 #define DRV_VERSION     "1.01"
 const char pch_driver_version[] = DRV_VERSION;
@@ -96,8 +98,6 @@ const char pch_driver_version[] = DRV_VERSION;
 #define PTP_L4_MULTICAST_SA "01:00:5e:00:01:81"
 #define PTP_L2_MULTICAST_SA "01:1b:19:00:00:00"
 
-#define MINNOW_PHY_RESET_GPIO          13
-
 static int pch_gbe_mdio_read(struct net_device *netdev, int addr, int reg);
 static void pch_gbe_mdio_write(struct net_device *netdev, int addr, int reg,
                               int data);
@@ -2627,26 +2627,45 @@ static int pch_gbe_probe(struct pci_dev *pdev,
        return ret;
 }
 
+static void pch_gbe_gpio_remove_table(void *table)
+{
+       gpiod_remove_lookup_table(table);
+}
+
+static int pch_gbe_gpio_add_table(struct device *dev, void *table)
+{
+       gpiod_add_lookup_table(table);
+       return devm_add_action_or_reset(dev, pch_gbe_gpio_remove_table, table);
+}
+
+static struct gpiod_lookup_table pch_gbe_minnow_gpio_table = {
+       .dev_id         = "0000:02:00.1",
+       .table          = {
+               GPIO_LOOKUP("sch_gpio.33158", 13, NULL, GPIO_ACTIVE_LOW),
+               {}
+       },
+};
+
 /* The AR803X PHY on the MinnowBoard requires a physical pin to be toggled to
  * ensure it is awake for probe and init. Request the line and reset the PHY.
  */
 static int pch_gbe_minnow_platform_init(struct pci_dev *pdev)
 {
-       unsigned long flags = GPIOF_OUT_INIT_HIGH;
-       unsigned gpio = MINNOW_PHY_RESET_GPIO;
+       struct gpio_desc *gpiod;
        int ret;
 
-       ret = devm_gpio_request_one(&pdev->dev, gpio, flags,
-                                   "minnow_phy_reset");
-       if (ret) {
-               dev_err(&pdev->dev,
-                       "ERR: Can't request PHY reset GPIO line '%d'\n", gpio);
+       ret = pch_gbe_gpio_add_table(&pdev->dev, &pch_gbe_minnow_gpio_table);
+       if (ret)
                return ret;
-       }
 
-       gpio_set_value(gpio, 0);
+       gpiod = devm_gpiod_get(&pdev->dev, NULL, GPIOD_OUT_HIGH);
+       if (IS_ERR(gpiod))
+               return dev_err_probe(&pdev->dev, PTR_ERR(gpiod),
+                                    "Can't request PHY reset GPIO line\n");
+
+       gpiod_set_value(gpiod, 1);
        usleep_range(1250, 1500);
-       gpio_set_value(gpio, 1);
+       gpiod_set_value(gpiod, 0);
        usleep_range(1250, 1500);
 
        return ret;
-- 
2.30.2