[PATCH net-next 6/7] net: phy: marvell10g: support more rate matching modes

[Marek Behún]

The 88X3310P supports rate matching mode also for XAUI and RXAUI.

Signed-off-by: Marek Behún <ka...@kernel.org>
---
 drivers/net/phy/marvell10g.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index b4f9831b4db6..c764795a142a 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -596,13 +596,22 @@ static void mv3310_update_interface(struct phy_device 
*phydev)
 {
        struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev);
 
-       /* In "XFI with Rate Matching" mode the PHY interface is fixed at
-        * 10Gb. The PHY adapts the rate to actual wire speed with help of
+       /* In all of the "* with Rate Matching" modes the PHY interface is fixed
+        * at 10Gb. The PHY adapts the rate to actual wire speed with help of
         * internal 16KB buffer.
         */
-       if (priv->mactype == MV_V2_PORT_CTRL_MACTYPE_10GBASER_RATE_MATCH) {
+       switch (priv->mactype) {
+       case MV_V2_PORT_CTRL_MACTYPE_10GBASER_RATE_MATCH:
                phydev->interface = PHY_INTERFACE_MODE_10GBASER;
                return;
+       case MV_V2_PORT_CTRL_MACTYPE_XAUI_RATE_MATCH:
+               phydev->interface = PHY_INTERFACE_MODE_XAUI;
+               return;
+       case MV_V2_PORT_CTRL_MACTYPE_RXAUI_RATE_MATCH:
+               phydev->interface = PHY_INTERFACE_MODE_RXAUI;
+               return;
+       default:
+               break;
        }
 
        if ((phydev->interface == PHY_INTERFACE_MODE_SGMII ||
-- 
2.26.2