Jesse Huang <[EMAIL PROTECTED]> writes:
Hi Jesse,
> - for (phy = 1; phy <= 32 && phy_idx < MII_CNT; phy++) {
> + if(sundance_pci_tbl[np->chip_id].device == 0x0200)
> + phy = 0;
> + else
> + phy = 1;
> + for (; phy <= 32 && phy_idx < MII_CNT; phy++) {
I think this value can be put in driver_data.
Attached patch is doing it, but I didn't test it.
tree 602e0c2def631e82635b4f8aad762e69184af143
parent 5ecd3100e695228ac5e0ce0e325e252c0f11806f
author Samir Bellabes <[EMAIL PROTECTED]> 1181086775 +0200
committer Samir Bellabes <[EMAIL PROTECTED]> 1181086775 +0200
Search PHY address form 0, only for device ID 0x0200 (IP100A). Other
device are from PHY address 1.
Noticed by Jesse Huang <[EMAIL PROTECTED]>
Signed-off-by: Samir Bellabes <[EMAIL PROTECTED]>
------------------------------------------------------------------------------
sundance.c | 40 +++++++++++++++++++++++++++++++---------
1 files changed, 31 insertions(+), 9 deletions(-)
------------------------------------------------------------------------------
diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c
index e1f912d..fb59801 100644
--- a/drivers/net/sundance.c
+++ b/drivers/net/sundance.c
@@ -205,14 +205,36 @@ #ifndef CONFIG_SUNDANCE_MMIO
#define USE_IO_OPS 1
#endif
+enum cfg_version {
+ SUNDANCE_CFG_0 = 0x00,
+ SUNDANCE_CFG_1,
+ SUNDANCE_CFG_2,
+ SUNDANCE_CFG_3,
+ SUNDANCE_CFG_4,
+ SUNDANCE_CFG_5,
+ SUNDANCE_CFG_6
+};
+
+static const struct {
+ unsigned int phy;
+} sundance_cfg_info[] = {
+ [SUNDANCE_CFG_0] = { 1 },
+ [SUNDANCE_CFG_1] = { 1 },
+ [SUNDANCE_CFG_2] = { 1 },
+ [SUNDANCE_CFG_3] = { 1 },
+ [SUNDANCE_CFG_4] = { 1 },
+ [SUNDANCE_CFG_5] = { 1 },
+ [SUNDANCE_CFG_6] = { 0 }
+};
+
static const struct pci_device_id sundance_pci_tbl[] = {
- { 0x1186, 0x1002, 0x1186, 0x1002, 0, 0, 0 },
- { 0x1186, 0x1002, 0x1186, 0x1003, 0, 0, 1 },
- { 0x1186, 0x1002, 0x1186, 0x1012, 0, 0, 2 },
- { 0x1186, 0x1002, 0x1186, 0x1040, 0, 0, 3 },
- { 0x1186, 0x1002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 },
- { 0x13F0, 0x0201, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5 },
- { 0x13F0, 0x0200, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 6 },
+ { 0x1186, 0x1002, 0x1186, 0x1002, 0, 0, SUNDANCE_CFG_0 },
+ { 0x1186, 0x1002, 0x1186, 0x1003, 0, 0, SUNDANCE_CFG_1 },
+ { 0x1186, 0x1002, 0x1186, 0x1012, 0, 0, SUNDANCE_CFG_2 },
+ { 0x1186, 0x1002, 0x1186, 0x1040, 0, 0, SUNDANCE_CFG_3 },
+ { 0x1186, 0x1002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, SUNDANCE_CFG_4 },
+ { 0x13F0, 0x0201, PCI_ANY_ID, PCI_ANY_ID, 0, 0, SUNDANCE_CFG_5 },
+ { 0x13F0, 0x0200, PCI_ANY_ID, PCI_ANY_ID, 0, 0, SUNDANCE_CFG_6 },
{ }
};
MODULE_DEVICE_TABLE(pci, sundance_pci_tbl);
@@ -468,7 +490,7 @@ #else
int bar = 1;
#endif
int phy, phy_idx = 0;
-
+ const unsigned int phy_start = sundance_cfg_info[ent->driver_data].phy;
/* when built into the kernel, we only print version if device is found */
#ifndef MODULE
@@ -562,7 +584,7 @@ #endif
* It seems some phys doesn't deal well with address 0 being accessed
* first, so leave address zero to the end of the loop (32 & 31).
*/
- for (phy = 1; phy <= 32 && phy_idx < MII_CNT; phy++) {
+ for (phy = phy_start; phy <= 32 && phy_idx < MII_CNT; phy++) {
int phyx = phy & 0x1f;
int mii_status = mdio_read(dev, phyx, MII_BMSR);
if (mii_status != 0xffff && mii_status != 0x0000) {
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
