On Sun, Jan 31, 2021 at 12:19:50PM +0000, Russell King - ARM Linux admin wrote:
> On Sun, Jan 31, 2021 at 11:12:14AM +0000, Russell King - ARM Linux admin 
> wrote:
> > I discussed it with Andrew earlier last year, and his response was:
> > 
> >  DT configuration of pause for fixed link probably is sufficient. I don't
> >  remember it ever been really discussed for DSA. It was a Melanox
> >  discussion about limiting pause for the CPU. So I think it is safe to
> >  not implement ethtool -A, at least until somebody has a real use case
> >  for it.
> > 
> > So I chose not to support it - no point supporting features that people
> > aren't using. If you have a "real use case" then it can be added.
> 
> This patch may be sufficient - I haven't fully considered all the
> implications of changing this though.

Did you try this patch? What's the outcome?

> 
>  drivers/net/phy/phylink.c | 9 +++------
>  1 file changed, 3 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
> index 7e0fdc17c8ee..2ee0d4dcf9a5 100644
> --- a/drivers/net/phy/phylink.c
> +++ b/drivers/net/phy/phylink.c
> @@ -673,7 +673,6 @@ static void phylink_resolve(struct work_struct *w)
>               switch (pl->cur_link_an_mode) {
>               case MLO_AN_PHY:
>                       link_state = pl->phy_state;
> -                     phylink_apply_manual_flow(pl, &link_state);
>                       mac_config = link_state.link;
>                       break;
>  
> @@ -698,11 +697,12 @@ static void phylink_resolve(struct work_struct *w)
>                               link_state.pause = pl->phy_state.pause;
>                               mac_config = true;
>                       }
> -                     phylink_apply_manual_flow(pl, &link_state);
>                       break;
>               }
>       }
>  
> +     phylink_apply_manual_flow(pl, &link_state);
> +
>       if (mac_config) {
>               if (link_state.interface != pl->link_config.interface) {
>                       /* The interface has changed, force the link down and
> @@ -1639,9 +1639,6 @@ int phylink_ethtool_set_pauseparam(struct phylink *pl,
>  
>       ASSERT_RTNL();
>  
> -     if (pl->cur_link_an_mode == MLO_AN_FIXED)
> -             return -EOPNOTSUPP;
> -
>       if (!phylink_test(pl->supported, Pause) &&
>           !phylink_test(pl->supported, Asym_Pause))
>               return -EOPNOTSUPP;
> @@ -1684,7 +1681,7 @@ int phylink_ethtool_set_pauseparam(struct phylink *pl,
>       /* Update our in-band advertisement, triggering a renegotiation if
>        * the advertisement changed.
>        */
> -     if (!pl->phydev)
> +     if (!pl->phydev && pl->cur_link_an_mode != MLO_AN_FIXED)
>               phylink_change_inband_advert(pl);
>  
>       mutex_unlock(&pl->state_mutex);
> 
> -- 
> RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
> FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!

Reply via email to