On Wed, Feb 03, 2021 at 09:56:28AM +0000, Russell King - ARM Linux admin wrote:
> On Wed, Feb 03, 2021 at 10:18:55AM +0100, Oleksij Rempel wrote:
> > This fixup removes the Lpi_en bit.
> >
> > If this patch breaks functionality of your board, use following device
> > tree properties:
> >
> > ethernet-phy@X {
> > reg = <0xX>;
> > eee-broken-1000t;
> > eee-broken-100tx;
> > ....
> > };
>
> That is the historical fix for this problem, but there is a better
> solution now in net-next - configuring the Tw parameter for gigabit
> connections. That solves the random link drop issue when EEE is
> enabled.
Do you mean this properties?
qca,smarteee-tw-us-1g
qca,smarteee-tw-us-100m
Do you have some recommendations, which values can be here used? Are
they same for all MACs? Or, can we calculate this values automatically?
Beside, I have seen this patch: "ARM: dts: imx6qdl-sr-som: fix some
cubox-i platforms"
I had similar issue and it was triggered by the boot loader, which
enabled 60 Ohm on-die termination. The fix was to remove this lines in
the boot loader: wm 32 0x020e07ac 0x00000200 /* 60 Ohm ODT */
> Support for this configuration has only recently been merged into
> net-next and other trees for this merge window, so I ask that you
> hold off at least this patch until the next cycle.
ok.
Regards,
Oleksij
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
