So far phy_disconnect() is called before free_irq(). If CONFIG_DEBUG_SHIRQ
is set and interrupt is shared, then free_irq() creates an "artificial"
interrupt by calling the interrupt handler. The "link change" flag is set
in the interrupt status register, causing phylib to eventually call
phy_suspend(). Because the net_device is detached from the PHY already,
the PHY driver can't recognize that WoL is configured and powers down the
PHY.
Fixes: f1e911d5d0df ("r8169: add basic phylib support")
Signed-off-by: Heiner Kallweit <hkallwe...@gmail.com>
---
drivers/net/ethernet/realtek/r8169_main.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/realtek/r8169_main.c
b/drivers/net/ethernet/realtek/r8169_main.c
index 4253d51a9..53c2079c7 100644
--- a/drivers/net/ethernet/realtek/r8169_main.c
+++ b/drivers/net/ethernet/realtek/r8169_main.c
@@ -4667,10 +4667,10 @@ static int rtl8169_close(struct net_device *dev)
cancel_work_sync(&tp->wk.work);
- phy_disconnect(tp->phydev);
-
free_irq(pci_irq_vector(pdev, 0), tp);
+ phy_disconnect(tp->phydev);
+
dma_free_coherent(&pdev->dev, R8169_RX_RING_BYTES, tp->RxDescArray,
tp->RxPhyAddr);
dma_free_coherent(&pdev->dev, R8169_TX_RING_BYTES, tp->TxDescArray,
--
2.30.0
