On Mon, Jan 25, 2021 at 04:22:34PM +0100, Daniele Palmas wrote:
> Add qmimux interface sysfs file qmap/mux_id to show qmap id set
> during the interface creation, in order to provide a method for
> userspace to associate QMI control channels to network interfaces.
>
> Signed-off-by: Daniele Palmas <dnl...@gmail.com>
> ---
> drivers/net/usb/qmi_wwan.c | 27 +++++++++++++++++++++++++++
> 1 file changed, 27 insertions(+)
>
> diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
> index 7ea113f51074..9b85e2ed4760 100644
> --- a/drivers/net/usb/qmi_wwan.c
> +++ b/drivers/net/usb/qmi_wwan.c
> @@ -218,6 +218,31 @@ static int qmimux_rx_fixup(struct usbnet *dev, struct
> sk_buff *skb)
> return 1;
> }
>
> +static ssize_t mux_id_show(struct device *d, struct device_attribute *attr,
> char *buf)
> +{
> + struct net_device *dev = to_net_dev(d);
> + struct qmimux_priv *priv;
> + ssize_t count = 0;
> +
> + priv = netdev_priv(dev);
> + count += scnprintf(&buf[count], PAGE_SIZE - count,
> + "0x%02x\n", priv->mux_id);
Odd way to do this, please just use sysfs_emit(). It looks like you
cut/pasted this from some other more complex logic.
thanks,
greg k-h
