On Mon, 2021-01-25 at 17:00 +0100, Bjørn Mork wrote: > Dan Williams <d...@redhat.com> writes: > > On Mon, 2021-01-25 at 00:33 -0700, Subash Abhinov Kasiviswanathan > > wrote: > > > Pass through mode is to allow packets in MAP format to be passed > > > on to the stack. rmnet driver can be used to process and > > > demultiplex > > > these packets. > > > > > > Pass through mode can be enabled when the device is in raw ip > > > mode > > > only. > > > Conversely, raw ip mode cannot be disabled when pass through mode > > > is > > > enabled. > > > > > > Userspace can use pass through mode in conjunction with rmnet > > > driver > > > through the following steps- > > > > > > 1. Enable raw ip mode on qmi_wwan device > > > 2. Enable pass through mode on qmi_wwan device > > > 3. Create a rmnet device with qmi_wwan device as real device > > > using > > > netlink > > > > This option is module-wide, right? > > > > eg, if there are multiple qmi_wwan-driven devices on the system, > > *all* > > of them must use MAP + passthrough, or none of them can, right? > > No, this is a per-netdev setting, just like the raw-ip flag.
Thanks for setting me straight. Glad to hear it. Dan
