From: Edwin Peer <edwin.p...@broadcom.com>
Drawing a hard line on aborted resets prevents a NIC open in
some scenarios that may otherwise be recoverable. For example,
if a firmware recovery happened while a PF was down and an
attempt was made to bring up an associated VF in this state,
then it was impossible to ever bring up this VF without a
rebind or reload of its driver.
Attempt to reinitialize the firmware when an aborted reset (or
failed init after a reset) is discovered during open - it may
succeed. Also take care to allow the user to retry opening the
NIC even after an aborted reset.
Signed-off-by: Edwin Peer <edwin.p...@broadcom.com>
Signed-off-by: Michael Chan <michael.c...@broadcom.com>
---
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 29 +++++++++++++++++++++--
1 file changed, 27 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index c8c25f7644ae..7f30a9fee0c8 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -9768,6 +9768,25 @@ static void bnxt_preset_reg_win(struct bnxt *bp)
static int bnxt_init_dflt_ring_mode(struct bnxt *bp);
+static int bnxt_reinit_after_abort(struct bnxt *bp)
+{
+ int rc;
+
+ if (test_bit(BNXT_STATE_IN_FW_RESET, &bp->state))
+ return -EBUSY;
+
+ rc = bnxt_fw_init_one(bp);
+ if (!rc) {
+ bnxt_clear_int_mode(bp);
+ rc = bnxt_init_int_mode(bp);
+ if (!rc) {
+ clear_bit(BNXT_STATE_ABORT_ERR, &bp->state);
+ set_bit(BNXT_STATE_FW_RESET_DET, &bp->state);
+ }
+ }
+ return rc;
+}
+
static int __bnxt_open_nic(struct bnxt *bp, bool irq_re_init, bool
link_re_init)
{
int rc = 0;
@@ -9926,8 +9945,14 @@ static int bnxt_open(struct net_device *dev)
int rc;
if (test_bit(BNXT_STATE_ABORT_ERR, &bp->state)) {
- netdev_err(bp->dev, "A previous firmware reset did not
complete, aborting\n");
- return -ENODEV;
+ rc = bnxt_reinit_after_abort(bp);
+ if (rc) {
+ if (rc == -EBUSY)
+ netdev_err(bp->dev, "A previous firmware reset
has not completed, aborting\n");
+ else
+ netdev_err(bp->dev, "Failed to reinitialize
after aborted firmware reset\n");
+ return -ENODEV;
+ }
}
rc = bnxt_hwrm_if_change(bp, true);
--
2.18.1
