On 18/01/2021 23:17, Nikolay Aleksandrov wrote:
> On 18/01/2021 22:19, Tobias Waldekranz wrote:
>> On Mon, Jan 18, 2021 at 21:27, Vladimir Oltean <olte...@gmail.com> wrote:
>>> On Mon, Jan 18, 2021 at 07:58:59PM +0100, Tobias Waldekranz wrote:
>>>> Ah I see, no I was not aware of that. I just saw that the entry towards
>>>> the CPU was added to the ATU, which it would in both cases. I.e. from
>>>> the switch's POV, in this setup:
>>>>
>>>> br0
>>>> / \ (A)
>>>> swp0 dummy0
>>>> (B)
>>>>
>>>> A "local" entry like (A), or a "static" entry like (B) means the same
>>>> thing to the switch: "it is somewhere behind my CPU-port".
>>>
>>> Yes, except that if dummy0 was a real and non-switchdev interface, then
>>> the "local" entry would probably break your traffic if what you meant
>>> was "static".
>>
>> Agreed.
>>
>>>>> So I think there is a very real issue in that the FDB entries with the
>>>>> is_local bit was never specified to switchdev thus far, and now suddenly
>>>>> is. I'm sorry, but what you're saying in the commit message, that
>>>>> "!added_by_user has so far been indistinguishable from is_local" is
>>>>> simply false.
>>>>
>>>> Alright, so how do you do it? Here is the struct:
>>>>
>>>> struct switchdev_notifier_fdb_info {
>>>> struct switchdev_notifier_info info; /* must be first */
>>>> const unsigned char *addr;
>>>> u16 vid;
>>>> u8 added_by_user:1,
>>>> offloaded:1;
>>>> };
>>>>
>>>> Which field separates a local address on swp0 from a dynamically learned
>>>> address on swp0?
>>>
>>> None, that's the problem. Local addresses are already presented to
>>> switchdev without saying that they're local. Which is the entire reason
>>> that users are misled into thinking that the addresses are not local.
>>>
>>> I may have misread what you said, but to me, "!added_by_user has so far
>>> been indistinguishable from is_local" means that:
>>> - every struct switchdev_notifier_fdb_info with added_by_user == true
>>> also had an implicit is_local == false
>>> - every struct switchdev_notifier_fdb_info with added_by_user == false
>>> also had an implicit is_local == true
>>> It is _this_ that I deemed as clearly untrue.
>>>
>>> The is_local flag is not indistinguishable from !added_by_user, it is
>>> indistinguishable full stop. Which makes it hard to work with in a
>>> backwards-compatible way.
>>
>> This was probably a semantic mistake on my part, we meant the same
>> thing.
>>
>>>> Ok, so just to see if I understand this correctly:
>>>>
>>>> The situation today it that `bridge fdb add ADDR dev DEV master` results
>>>> in flows towards ADDR being sent to:
>>>>
>>>> 1. DEV if DEV belongs to a DSA switch.
>>>> 2. To the host if DEV was a non-offloaded interface.
>>>
>>> Not quite. In the bridge software FDB, the entry is marked as is_local
>>> in both cases, doesn't matter if the interface is offloaded or not.
>>> Just that switchdev does not propagate the is_local flag, which makes
>>> the switchdev listeners think it is not local. The interpretation of
>>> that will probably vary among switchdev drivers.
>>>
>>> The subtlety is that for a non-offloading interface, the
>>> misconfiguration (when you mean static but use local) is easy to catch.
>>> Since only the entry from the software FDB will be hit, this means that
>>> the frame will never be forwarded, so traffic will break.
>>> But in the case of a switchdev offloading interface, the frames will hit
>>> the hardware FDB entry more often than the software FDB entry. So
>>> everything will work just fine and dandy even though it shouldn't.
>>
>> Quite right.
>>
>>>> With this series applied both would result in (2) which, while
>>>> idiosyncratic, is as intended. But this of course runs the risk of
>>>> breaking existing scripts which rely on the current behavior.
>>>
>>> Yes.
>>>
>>> My only hope is that we could just offload the entries pointing towards
>>> br0, and ignore the local ones. But for that I would need the bridge
>>
>> That was my initial approach. Unfortunately that breaks down when the
>> bridge inherits its address from a port, i.e. the default case.
>>
>> When the address is added to the bridge (fdb->dst == NULL), fdb_insert
>> will find the previous local entry that is set on the port and bail out
>> before sending a notification:
>>
>> if (fdb) {
>> /* it is okay to have multiple ports with same
>> * address, just use the first one.
>> */
>> if (test_bit(BR_FDB_LOCAL, &fdb->flags))
>> return 0;
>> br_warn(br, "adding interface %s with same address as a
>> received packet (addr:%pM, vlan:%u)\n",
>> source ? source->dev->name : br->dev->name, addr, vid);
>> fdb_delete(br, fdb, true);
>> }
>>
>> You could change this so that a notification always is sent out. Or you
>> could give precedence to !fdb->dst and update the existing entry.
>>
>>> maintainers to clarify what is the difference between then, as I asked
>>> in your other patch.
>>
>> I am pretty sure they mean the same thing, I believe that !fdb->dst
>> implies is_local. It is just that "bridge fdb add ADDR dev br0 self" is
>> a new(er) thing, and before that there was "local" entries on ports.
>>
>> Maybe I should try to get rid of the local flag in the bridge first, and
>> then come back to this problem once that is done? Either way, I agree
>> that 5/7 is all we want to add to DSA to get this working.
>>
>
> BR_FDB_LOCAL and !fdb->dst are not the same thing, check fdb_add_entry().
> You cannot get rid of it, !fdb->dst implies BR_FDB_LOCAL, but it's not
> symmetrical.
>
Scratch that, I spoke too soon. You can get rid of it internally, just need
to be careful not to break user-visible behaviour as Vladimir mentioned.
> Cheers,
> Nik
>
