Currently the smsc911x driver has mininal power management: during
driver probe, the device is powered up, and during driver remove, it is
powered down.

Improve power management by making it more fine-grained:
  1. Power the device down when driver probe is finished,
  2. Power the device (down) when it is opened (closed),
  3. Make sure the device is powered during PHY access.

Signed-off-by: Geert Uytterhoeven <geert+rene...@glider.be>
---
Tested on r8a73a4/ape6evm, where the LAN9220 is connected to a
power-managed bus, and any attempt to access a device register while the
device is suspended will trigger an asynchronous external abort.
---
 drivers/net/ethernet/smsc/smsc911x.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/smsc/smsc911x.c 
b/drivers/net/ethernet/smsc/smsc911x.c
index 823d9a7184fe6aa1..606c79de93a68146 100644
--- a/drivers/net/ethernet/smsc/smsc911x.c
+++ b/drivers/net/ethernet/smsc/smsc911x.c
@@ -557,6 +557,7 @@ static int smsc911x_mii_read(struct mii_bus *bus, int 
phyaddr, int regidx)
        unsigned int addr;
        int i, reg;
 
+       pm_runtime_get_sync(bus->parent);
        spin_lock_irqsave(&pdata->mac_lock, flags);
 
        /* Confirm MII not busy */
@@ -582,6 +583,7 @@ static int smsc911x_mii_read(struct mii_bus *bus, int 
phyaddr, int regidx)
 
 out:
        spin_unlock_irqrestore(&pdata->mac_lock, flags);
+       pm_runtime_put(bus->parent);
        return reg;
 }
 
@@ -594,6 +596,7 @@ static int smsc911x_mii_write(struct mii_bus *bus, int 
phyaddr, int regidx,
        unsigned int addr;
        int i, reg;
 
+       pm_runtime_get_sync(bus->parent);
        spin_lock_irqsave(&pdata->mac_lock, flags);
 
        /* Confirm MII not busy */
@@ -623,6 +626,7 @@ static int smsc911x_mii_write(struct mii_bus *bus, int 
phyaddr, int regidx,
 
 out:
        spin_unlock_irqrestore(&pdata->mac_lock, flags);
+       pm_runtime_put(bus->parent);
        return reg;
 }
 
@@ -1589,6 +1593,8 @@ static int smsc911x_open(struct net_device *dev)
        int retval;
        int irq_flags;
 
+       pm_runtime_get_sync(dev->dev.parent);
+
        /* find and start the given phy */
        if (!dev->phydev) {
                retval = smsc911x_mii_probe(dev);
@@ -1735,6 +1741,7 @@ static int smsc911x_open(struct net_device *dev)
        phy_disconnect(dev->phydev);
        dev->phydev = NULL;
 out:
+       pm_runtime_put(dev->dev.parent);
        return retval;
 }
 
@@ -1766,6 +1773,7 @@ static int smsc911x_stop(struct net_device *dev)
                dev->phydev = NULL;
        }
        netif_carrier_off(dev);
+       pm_runtime_put(dev->dev.parent);
 
        SMSC_TRACE(pdata, ifdown, "Interface stopped");
        return 0;
@@ -2334,7 +2342,6 @@ static int smsc911x_drv_remove(struct platform_device 
*pdev)
 
        free_netdev(dev);
 
-       pm_runtime_put(&pdev->dev);
        pm_runtime_disable(&pdev->dev);
 
        return 0;
@@ -2540,6 +2547,7 @@ static int smsc911x_drv_probe(struct platform_device 
*pdev)
        }
 
        spin_unlock_irq(&pdata->mac_lock);
+       pm_runtime_put(&pdev->dev);
 
        netdev_info(dev, "MAC Address: %pM\n", dev->dev_addr);
 
-- 
2.25.1

Reply via email to