I resend this patchset to loop in networking developers for comments. This is the previous thread. I'll fix other comments when I have a v2.
https://lore.kernel.org/lkml/x%2fv9hvxyluot9...@kroah.com/ The patchset is for the retimers connected to Intel MAX 10 BMC on Intel PAC (Programmable Acceleration Card) N3000 Card. The network part of the N3000 card is like the following: +----------------------------------------+ | FPGA | +----+ +-------+ +-----------+ +----------+ +-----------+ +----------+ |QSFP|---|retimer|---|Line Side |--|User logic|--|Host Side |---|XL710 | +----+ +-------+ |Ether Group| | | |Ether Group| |Ethernet | |(PHY + MAC)| |wiring & | |(MAC + PHY)| |Controller| +-----------+ |offloading| +-----------+ +----------+ | +----------+ | | | +----------------------------------------+ I had sent some RFC patches to expose the Line Side Ether Group + retimer + QSFP as a netdev, and got some comments from netdev Maintainers. https://lore.kernel.org/netdev/1603442745-13085-2-git-send-email-yilun...@intel.com/ The blocking issues I have is that physically the QSFP & retimer is managed by the BMC and host could only get the retimer link states. This is not enough to support some necessary netdev ops. E.g. host cannot realize the type/speed of the SFP by "ethtool -m", then users could not configure the various layers accordingly. This means the existing net tool can not work with it, so this patch just expose the link states as custom sysfs attrs. This patchset supports the ethernet retimers (C827) for the Intel PAC (Programmable Acceleration Card) N3000, which is a FPGA based Smart NIC. The 2 retimer chips connect to the Intel MAX 10 BMC on the card. They are managed by the BMC firmware. Host could query their link states and firmware version information via retimer interfaces (Shared registers) on the BMC. The driver creates sysfs interfaces for users to query these information. The Intel OPAE (Open Programmable Acceleration Engine) lib provides tools to read these attributes. This is the source of the OPAE lib. https://github.com/OPAE/opae-sdk/ Generally it facilitate the development on all the DFL (Device Feature List) based FPGA Cards, including the management of static region & dynamic region reprogramming, accelerators accessing and the board specific peripherals. Xu Yilun (2): mfd: intel-m10-bmc: specify the retimer sub devices misc: add support for retimers interfaces on Intel MAX 10 BMC .../ABI/testing/sysfs-driver-intel-m10-bmc-retimer | 32 +++++ drivers/mfd/intel-m10-bmc.c | 19 ++- drivers/misc/Kconfig | 10 ++ drivers/misc/Makefile | 1 + drivers/misc/intel-m10-bmc-retimer.c | 158 +++++++++++++++++++++ include/linux/mfd/intel-m10-bmc.h | 7 + 6 files changed, 226 insertions(+), 1 deletion(-) create mode 100644 Documentation/ABI/testing/sysfs-driver-intel-m10-bmc-retimer create mode 100644 drivers/misc/intel-m10-bmc-retimer.c -- 2.7.4
