The KS8851 has a reduced internal PHY, which is accessible through its
registers at offset 0xe4. The PHY is compatible with KS886x PHY present
in Micrel switches, including the PHY ID Low/High registers swap, which
is present both in the MAC and the switch.
Reviewed-by: Andrew Lunn <and...@lunn.ch>
Signed-off-by: Marek Vasut <ma...@denx.de>
Cc: Andrew Lunn <and...@lunn.ch>
Cc: Heiner Kallweit <hkallwe...@gmail.com>
Cc: Lukas Wunner <lu...@wunner.de>
---
V2: Merge the KSZ8851 and KS886X entries, as those PHYs cannot be discerned
V3: Add RB from Andrew
---
drivers/net/phy/micrel.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 54e0d75203da..39c7c786a912 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -1389,7 +1389,7 @@ static struct phy_driver ksphy_driver[] = {
}, {
.phy_id = PHY_ID_KSZ886X,
.phy_id_mask = MICREL_PHY_ID_MASK,
- .name = "Micrel KSZ886X Switch",
+ .name = "Micrel KSZ8851 Ethernet MAC or KSZ886X Switch",
/* PHY_BASIC_FEATURES */
.config_init = kszphy_config_init,
.suspend = genphy_suspend,
--
2.29.2
