hi
In the process of developing xdp socket, we tried to directly use page to
construct skb directly, to avoid data copy. And the MAC information is also in
the page, which caused the linear space of skb to be empty. In this case, I
encountered a problem :
mlx5_core 0000:3b:00.1 eth1: Error cqe on cqn 0x817, ci 0x8, qn 0x1dbb, opcode
0xd, syndrome 0x1, vendor syndrome 0x68
00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000030: 00 00 00 00 60 10 68 01 0a 00 1d bb 00 0f 9f d2
WQE DUMP: WQ size 1024 WQ cur size 0, WQE index 0xf, len: 64
00000000: 00 00 0f 0a 00 1d bb 03 00 00 00 08 00 00 00 00
00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000020: 00 00 00 2b 00 08 00 00 00 00 00 05 9e e3 08 00
00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
mlx5_core 0000:3b:00.1 eth1: ERR CQE on SQ: 0x1dbb
And when I try to copy only the mac address into the linear space of skb, the
other parts are still placed in the page. When constructing skb in this way, I
found that although the data can be sent successfully, the sending performance
is relatively poor!!
I would like to ask, is there any way to solve this problem?
dev info:
driver: mlx5_core
version: 5.10.0+
firmware-version: 14.21.2328 (MT_2470112034)
expansion-rom-version:
bus-info: 0000:3b:00.0
supports-statistics: yes
supports-test: yes
supports-eeprom-access: no
supports-register-dump: no
supports-priv-flags: yes
