This adds phylink support for ports and register base injection
and extraction.

Signed-off-by: Steen Hegelund <steen.hegel...@microchip.com>
Signed-off-by: Bjarni Jonasson <bjarni.jonas...@microchip.com>
Signed-off-by: Lars Povlsen <lars.povl...@microchip.com>
---
 .../net/ethernet/microchip/sparx5/Makefile    |   2 +-
 .../ethernet/microchip/sparx5/sparx5_main.c   |  68 +++++
 .../ethernet/microchip/sparx5/sparx5_main.h   |  26 ++
 .../ethernet/microchip/sparx5/sparx5_netdev.c | 203 +++++++++++++
 .../ethernet/microchip/sparx5/sparx5_packet.c | 273 ++++++++++++++++++
 .../microchip/sparx5/sparx5_phylink.c         | 168 +++++++++++
 6 files changed, 739 insertions(+), 1 deletion(-)
 create mode 100644 drivers/net/ethernet/microchip/sparx5/sparx5_netdev.c
 create mode 100644 drivers/net/ethernet/microchip/sparx5/sparx5_packet.c
 create mode 100644 drivers/net/ethernet/microchip/sparx5/sparx5_phylink.c

diff --git a/drivers/net/ethernet/microchip/sparx5/Makefile 
b/drivers/net/ethernet/microchip/sparx5/Makefile
index 41a31843d86f..19a593d17f4a 100644
--- a/drivers/net/ethernet/microchip/sparx5/Makefile
+++ b/drivers/net/ethernet/microchip/sparx5/Makefile
@@ -5,4 +5,4 @@
 
 obj-$(CONFIG_SPARX5_SWITCH) += sparx5-switch.o
 
-sparx5-switch-objs  := sparx5_main.o
+sparx5-switch-objs  := sparx5_main.o sparx5_packet.o sparx5_netdev.o 
sparx5_phylink.o
diff --git a/drivers/net/ethernet/microchip/sparx5/sparx5_main.c 
b/drivers/net/ethernet/microchip/sparx5/sparx5_main.c
index 67435fa45c7f..baa108cd99b2 100644
--- a/drivers/net/ethernet/microchip/sparx5/sparx5_main.c
+++ b/drivers/net/ethernet/microchip/sparx5/sparx5_main.c
@@ -240,13 +240,20 @@ static int sparx5_probe_port(struct sparx5 *sparx5,
                             u32 portno,
                             struct sparx5_port_config *conf)
 {
+       phy_interface_t phy_mode = conf->phy_mode;
        struct sparx5_port *spx5_port;
        struct net_device *ndev;
+       struct phylink *phylink;
        int err;
 
        err = sparx5_create_targets(sparx5);
        if (err)
                return err;
+       ndev = sparx5_create_netdev(sparx5, portno);
+       if (IS_ERR(ndev)) {
+               dev_err(sparx5->dev, "Could not create net device: %02u\n", 
portno);
+               return PTR_ERR(ndev);
+       }
        spx5_port = netdev_priv(ndev);
        spx5_port->of_node = portnp;
        spx5_port->serdes = serdes;
@@ -262,6 +269,24 @@ static int sparx5_probe_port(struct sparx5 *sparx5,
        spx5_port->conf.speed = SPEED_UNKNOWN;
        spx5_port->conf.power_down = true;
        sparx5->ports[portno] = spx5_port;
+       /* Create a phylink for PHY management.  Also handles SFPs */
+       spx5_port->phylink_config.dev = &spx5_port->ndev->dev;
+       spx5_port->phylink_config.type = PHYLINK_NETDEV;
+       spx5_port->phylink_config.pcs_poll = true;
+
+       /* phylink needs a valid interface mode to parse dt node */
+       if (phy_mode == PHY_INTERFACE_MODE_NA)
+               phy_mode = PHY_INTERFACE_MODE_10GBASER;
+
+       phylink = phylink_create(&spx5_port->phylink_config,
+                                of_fwnode_handle(portnp),
+                                phy_mode,
+                                &sparx5_phylink_mac_ops);
+       if (IS_ERR(phylink))
+               return PTR_ERR(phylink);
+
+       spx5_port->phylink = phylink;
+
        return 0;
 }
 
@@ -336,6 +361,9 @@ static int sparx5_init_switchcore(struct sparx5 *sparx5)
        spx5_wr(ANA_AC_STAT_RESET_RESET_SET(1), sparx5, ANA_AC_STAT_RESET);
        spx5_wr(ASM_STAT_CFG_STAT_CNT_CLR_SHOT_SET(1), sparx5, ASM_STAT_CFG);
 
+       /* Configure manual injection */
+       sparx5_manual_injection_mode(sparx5);
+
        /* Enable switch-core and queue system */
        spx5_wr(HSCH_RESET_CFG_CORE_ENA_SET(1), sparx5, HSCH_RESET_CFG);
 
@@ -495,11 +523,22 @@ static int sparx5_qlim_set(struct sparx5 *sparx5)
 
 static int sparx5_init(struct sparx5 *sparx5)
 {
+       int irq, ret;
        u32 idx;
 
        if (sparx5_create_targets(sparx5))
                return -ENODEV;
 
+       /* Hook xtr irq */
+       irq = platform_get_irq(sparx5->pdev, 0);
+       if (irq < 0)
+               return irq;
+       ret = devm_request_irq(sparx5->dev, irq,
+                              sparx5_xtr_handler, IRQF_SHARED,
+                              "sparx5-xtr", sparx5);
+       if (ret)
+               return ret;
+
        /* Read chip ID to check CPU interface */
        sparx5->chip_id = spx5_rd(sparx5, GCB_CHIP_ID);
 
@@ -580,6 +619,18 @@ static void sparx5_board_init(struct sparx5 *sparx5)
        }
 }
 
+static void sparx5_cleanup_ports(struct sparx5 *sparx5)
+{
+       int idx;
+
+       for (idx = 0; idx < SPX5_PORTS; ++idx) {
+               struct sparx5_port *port = sparx5->ports[idx];
+
+               if (port && port->ndev)
+                       sparx5_destroy_netdev(sparx5, port);
+       }
+}
+
 static int mchp_sparx5_probe(struct platform_device *pdev)
 {
        struct device_node *np = pdev->dev.of_node;
@@ -666,12 +717,28 @@ static int mchp_sparx5_probe(struct platform_device *pdev)
                        goto cleanup_ports;
                }
        }
+       err = sparx5_register_netdevs(sparx5);
+       if (err)
+               goto cleanup_ports;
+
        sparx5_board_init(sparx5);
 
+       return err;
+
 cleanup_ports:
+       sparx5_cleanup_ports(sparx5);
        return err;
 }
 
+static int mchp_sparx5_remove(struct platform_device *pdev)
+{
+       struct sparx5 *sparx5 = platform_get_drvdata(pdev);
+
+       sparx5_cleanup_ports(sparx5);
+
+       return 0;
+}
+
 static const struct of_device_id mchp_sparx5_match[] = {
        { .compatible = "microchip,sparx5-switch" },
        { }
@@ -680,6 +747,7 @@ MODULE_DEVICE_TABLE(of, mchp_sparx5_match);
 
 static struct platform_driver mchp_sparx5_driver = {
        .probe = mchp_sparx5_probe,
+       .remove = mchp_sparx5_remove,
        .driver = {
                .name = "sparx5-switch",
                .of_match_table = mchp_sparx5_match,
diff --git a/drivers/net/ethernet/microchip/sparx5/sparx5_main.h 
b/drivers/net/ethernet/microchip/sparx5/sparx5_main.h
index 887b4f80b2db..a92ebf339fe1 100644
--- a/drivers/net/ethernet/microchip/sparx5/sparx5_main.h
+++ b/drivers/net/ethernet/microchip/sparx5/sparx5_main.h
@@ -93,6 +93,9 @@ struct sparx5_port {
        struct device_node         *of_node;
        struct phy                 *serdes;
        struct sparx5_port_config  conf;
+       struct phylink_config      phylink_config;
+       struct phylink             *phylink;
+       struct phylink_pcs         phylink_pcs;
        u16                        portno;
        /* Ingress default VLAN (pvid) */
        u16                        pvid;
@@ -132,6 +135,27 @@ struct sparx5 {
        bool                                  sd_sgpio_remapping;
 };
 
+/* sparx5_main.c */
+void sparx5_update_cpuport_stats(struct sparx5 *sparx5, int portno);
+bool sparx5_is_cpuport_stat(struct sparx5 *sparx5, int idx);
+
+/* sparx5_packet.c */
+irqreturn_t sparx5_xtr_handler(int irq, void *_priv);
+int sparx5_port_xmit_impl(struct sk_buff *skb, struct net_device *dev);
+void sparx5_manual_injection_mode(struct sparx5 *sparx5);
+
+/* sparx5_netdev.c */
+bool sparx5_netdevice_check(const struct net_device *dev);
+struct net_device *sparx5_create_netdev(struct sparx5 *sparx5, u32 portno);
+int sparx5_register_netdevs(struct sparx5 *sparx5);
+void sparx5_destroy_netdev(struct sparx5 *sparx5, struct sparx5_port *port);
+
+/* Configuration */
+static inline bool sparx5_use_cu_phy(struct sparx5_port *port)
+{
+       return port->conf.phy_mode != PHY_INTERFACE_MODE_NA;
+}
+
 /* Clock period in picoseconds */
 static inline u32 sparx5_clk_period(enum sparx5_core_clockfreq cclock)
 {
@@ -146,6 +170,8 @@ static inline u32 sparx5_clk_period(enum 
sparx5_core_clockfreq cclock)
        }
 }
 
+extern const struct phylink_mac_ops sparx5_phylink_mac_ops;
+
 /* Calculate raw offset */
 static inline __pure int spx5_offset(int id, int tinst, int tcnt,
                                     int gbase, int ginst,
diff --git a/drivers/net/ethernet/microchip/sparx5/sparx5_netdev.c 
b/drivers/net/ethernet/microchip/sparx5/sparx5_netdev.c
new file mode 100644
index 000000000000..6f9282e9d3f4
--- /dev/null
+++ b/drivers/net/ethernet/microchip/sparx5/sparx5_netdev.c
@@ -0,0 +1,203 @@
+// SPDX-License-Identifier: GPL-2.0+
+/* Microchip Sparx5 Switch driver
+ *
+ * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
+ */
+
+#include "sparx5_main.h"
+
+/* The IFH bit position of the first VSTAX bit. This is because the
+ * VSTAX bit positions in Data sheet is starting from zero.
+ */
+#define VSTAX 73
+
+static void ifh_encode_bitfield(void *ifh, u64 value, u32 pos, u32 width)
+{
+       u8 *ifh_hdr = ifh;
+       /* Calculate the Start IFH byte position of this IFH bit position */
+       u32 byte = (35 - (pos / 8));
+       /* Calculate the Start bit position in the Start IFH byte */
+       u32 bit  = (pos % 8);
+       u64 encode = GENMASK(bit + width - 1, bit) & (value << bit);
+
+       /* Max width is 5 bytes - 40 bits. In worst case this will
+        * spread over 6 bytes - 48 bits
+        */
+       compiletime_assert(width <= 40, "Unsupported width, must be <= 40");
+
+       /* The b0-b7 goes into the start IFH byte */
+       if (encode & 0xFF)
+               ifh_hdr[byte] |= (u8)((encode & 0xFF));
+       /* The b8-b15 goes into the next IFH byte */
+       if (encode & 0xFF00)
+               ifh_hdr[byte - 1] |= (u8)((encode & 0xFF00) >> 8);
+       /* The b16-b23 goes into the next IFH byte */
+       if (encode & 0xFF0000)
+               ifh_hdr[byte - 2] |= (u8)((encode & 0xFF0000) >> 16);
+       /* The b24-b31 goes into the next IFH byte */
+       if (encode & 0xFF000000)
+               ifh_hdr[byte - 3] |= (u8)((encode & 0xFF000000) >> 24);
+       /* The b32-b39 goes into the next IFH byte */
+       if (encode & 0xFF00000000)
+               ifh_hdr[byte - 4] |= (u8)((encode & 0xFF00000000) >> 32);
+       /* The b40-b47 goes into the next IFH byte */
+       if (encode & 0xFF0000000000)
+               ifh_hdr[byte - 5] |= (u8)((encode & 0xFF0000000000) >> 40);
+}
+
+static void sparx5_set_port_ifh(void *ifh_hdr, u16 portno)
+{
+       /* VSTAX.RSV = 1. MSBit must be 1 */
+       ifh_encode_bitfield(ifh_hdr, 1, VSTAX + 79,  1);
+       /* VSTAX.INGR_DROP_MODE = Enable. Don't make head-of-line blocking */
+       ifh_encode_bitfield(ifh_hdr, 1, VSTAX + 55,  1);
+       /* MISC.CPU_MASK/DPORT = Destination port */
+       ifh_encode_bitfield(ifh_hdr, portno,   29, 8);
+       /* MISC.PIPELINE_PT */
+       ifh_encode_bitfield(ifh_hdr, 16,       37, 5);
+       /* MISC.PIPELINE_ACT */
+       ifh_encode_bitfield(ifh_hdr, 1,        42, 3);
+       /* FWD.SRC_PORT = CPU */
+       ifh_encode_bitfield(ifh_hdr, SPX5_PORT_CPU, 46, 7);
+       /* FWD.SFLOW_ID (disable SFlow sampling) */
+       ifh_encode_bitfield(ifh_hdr, 124,      57, 7);
+       /* FWD.UPDATE_FCS = Enable. Enforce update of FCS. */
+       ifh_encode_bitfield(ifh_hdr, 1,        67, 1);
+}
+
+static int sparx5_port_open(struct net_device *ndev)
+{
+       struct sparx5_port *port = netdev_priv(ndev);
+       int err = 0;
+
+       err = phylink_of_phy_connect(port->phylink, port->of_node, 0);
+       if (err) {
+               netdev_err(ndev, "Could not attach to PHY\n");
+               return err;
+       }
+
+       phylink_start(port->phylink);
+
+       if (!ndev->phydev) {
+               /* power up serdes */
+               port->conf.power_down = false;
+               err = phy_power_on(port->serdes);
+               if (err)
+                       netdev_err(ndev, "%s failed\n", __func__);
+       }
+
+       return err;
+}
+
+static int sparx5_port_stop(struct net_device *ndev)
+{
+       struct sparx5_port *port = netdev_priv(ndev);
+       int err = 0;
+
+       phylink_stop(port->phylink);
+       phylink_disconnect_phy(port->phylink);
+
+       if (!ndev->phydev) {
+               port->conf.power_down = true;
+               err = phy_power_off(port->serdes);
+               if (err)
+                       netdev_err(ndev, "%s failed\n", __func__);
+       }
+       return 0;
+}
+
+static int sparx5_port_get_phys_port_name(struct net_device *dev,
+                                         char *buf, size_t len)
+{
+       struct sparx5_port *port = netdev_priv(dev);
+       int ret;
+
+       ret = snprintf(buf, len, "p%d", port->portno);
+       if (ret >= len)
+               return -EINVAL;
+
+       return 0;
+}
+
+static int sparx5_set_mac_address(struct net_device *dev, void *p)
+{
+       const struct sockaddr *addr = p;
+
+       /* Record the address */
+       ether_addr_copy(dev->dev_addr, addr->sa_data);
+
+       return 0;
+}
+
+static const struct net_device_ops sparx5_port_netdev_ops = {
+       .ndo_open               = sparx5_port_open,
+       .ndo_stop               = sparx5_port_stop,
+       .ndo_start_xmit         = sparx5_port_xmit_impl,
+       .ndo_get_phys_port_name = sparx5_port_get_phys_port_name,
+       .ndo_set_mac_address    = sparx5_set_mac_address,
+       .ndo_validate_addr      = eth_validate_addr,
+};
+
+bool sparx5_netdevice_check(const struct net_device *dev)
+{
+       return dev && (dev->netdev_ops == &sparx5_port_netdev_ops);
+}
+
+struct net_device *sparx5_create_netdev(struct sparx5 *sparx5, u32 portno)
+{
+       struct net_device *ndev;
+       struct sparx5_port *spx5_port;
+
+       ndev = devm_alloc_etherdev(sparx5->dev, sizeof(struct sparx5_port));
+       if (!ndev)
+               return ERR_PTR(-ENOMEM);
+
+       SET_NETDEV_DEV(ndev, sparx5->dev);
+       spx5_port = netdev_priv(ndev);
+       spx5_port->ndev = ndev;
+       spx5_port->sparx5 = sparx5;
+       spx5_port->portno = portno;
+       sparx5_set_port_ifh(spx5_port->ifh, portno);
+       snprintf(ndev->name, IFNAMSIZ, "eth%d", portno);
+
+       ether_setup(ndev);
+       ndev->netdev_ops = &sparx5_port_netdev_ops;
+       ndev->features |= NETIF_F_LLTX; /* software tx */
+
+       ether_addr_copy(ndev->dev_addr, sparx5->base_mac);
+       ndev->dev_addr[ETH_ALEN - 1] += portno + 1;
+
+       return ndev;
+}
+
+int sparx5_register_netdevs(struct sparx5 *sparx5)
+{
+       int portno;
+       int err;
+
+       for (portno = 0; portno < SPX5_PORTS; portno++)
+               if (sparx5->ports[portno]) {
+                       err = devm_register_netdev(sparx5->dev,
+                                                  sparx5->ports[portno]->ndev);
+                       if (err) {
+                               dev_err(sparx5->dev,
+                                       "port: %02u: netdev registration 
failed\n",
+                                       portno);
+                               return err;
+                       }
+               }
+       return 0;
+}
+
+void sparx5_destroy_netdev(struct sparx5 *sparx5, struct sparx5_port *port)
+{
+       if (port->phylink) {
+               /* Disconnect the phy */
+               rtnl_lock();
+               sparx5_port_stop(port->ndev);
+               phylink_disconnect_phy(port->phylink);
+               rtnl_unlock();
+               phylink_destroy(port->phylink);
+               port->phylink = NULL;
+       }
+}
diff --git a/drivers/net/ethernet/microchip/sparx5/sparx5_packet.c 
b/drivers/net/ethernet/microchip/sparx5/sparx5_packet.c
new file mode 100644
index 000000000000..209eef5c6385
--- /dev/null
+++ b/drivers/net/ethernet/microchip/sparx5/sparx5_packet.c
@@ -0,0 +1,273 @@
+// SPDX-License-Identifier: GPL-2.0+
+/* Microchip Sparx5 Switch driver
+ *
+ * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
+ */
+
+#include "sparx5_main.h"
+
+#define XTR_EOF_0     ntohl((__force __be32)0x80000000u)
+#define XTR_EOF_1     ntohl((__force __be32)0x80000001u)
+#define XTR_EOF_2     ntohl((__force __be32)0x80000002u)
+#define XTR_EOF_3     ntohl((__force __be32)0x80000003u)
+#define XTR_PRUNED    ntohl((__force __be32)0x80000004u)
+#define XTR_ABORT     ntohl((__force __be32)0x80000005u)
+#define XTR_ESCAPE    ntohl((__force __be32)0x80000006u)
+#define XTR_NOT_READY ntohl((__force __be32)0x80000007u)
+
+#define XTR_VALID_BYTES(x)      (4 - ((x) & 3))
+
+#define XTR_QUEUE     0
+#define INJ_QUEUE     0
+
+struct frame_info {
+       int src_port;
+};
+
+static void sparx5_xtr_flush(struct sparx5 *sparx5, u8 grp)
+{
+       /* Start flush */
+       spx5_wr(QS_XTR_FLUSH_FLUSH_SET(BIT(grp)), sparx5, QS_XTR_FLUSH);
+
+       /* Allow to drain */
+       mdelay(1);
+
+       /* All Queues normal */
+       spx5_wr(0, sparx5, QS_XTR_FLUSH);
+}
+
+static void sparx5_ifh_parse(u32 *ifh, struct frame_info *info)
+{
+       u8 *xtr_hdr = (u8 *)ifh;
+
+       /* FWD is bit 45-72 (28 bits), but we only read the 27 LSB for now */
+       u32 fwd =
+               ((u32)xtr_hdr[27] << 24) |
+               ((u32)xtr_hdr[28] << 16) |
+               ((u32)xtr_hdr[29] <<  8) |
+               ((u32)xtr_hdr[30] <<  0);
+       fwd = (fwd >> 5);
+       info->src_port = FIELD_GET(GENMASK(7, 1), fwd);
+}
+
+static void sparx5_xtr_grp(struct sparx5 *sparx5, u8 grp, bool byte_swap)
+{
+       int i, byte_cnt = 0;
+       bool eof_flag = false, pruned_flag = false, abort_flag = false;
+       u32 ifh[IFH_LEN];
+       struct sk_buff *skb;
+       struct frame_info fi;
+       struct sparx5_port *port;
+       struct net_device *netdev;
+       u32 *rxbuf;
+
+       /* Get IFH */
+       for (i = 0; i < IFH_LEN; i++)
+               ifh[i] = spx5_rd(sparx5, QS_XTR_RD(grp));
+
+       /* Decode IFH (whats needed) */
+       sparx5_ifh_parse(ifh, &fi);
+
+       /* Map to port netdev */
+       port = fi.src_port < SPX5_PORTS ?
+               sparx5->ports[fi.src_port] : NULL;
+       if (!port || !port->ndev) {
+               dev_err(sparx5->dev, "Data on inactive port %d\n", fi.src_port);
+               sparx5_xtr_flush(sparx5, grp);
+               return;
+       }
+
+       /* Have netdev, get skb */
+       netdev = port->ndev;
+       skb = netdev_alloc_skb(netdev, netdev->mtu + ETH_HLEN);
+       if (!skb) {
+               sparx5_xtr_flush(sparx5, grp);
+               dev_err(sparx5->dev, "No skb allocated\n");
+               return;
+       }
+       rxbuf = (u32 *)skb->data;
+
+       /* Now, pull frame data */
+       while (!eof_flag) {
+               u32 val = spx5_rd(sparx5, QS_XTR_RD(grp));
+               u32 cmp = val;
+
+               if (byte_swap)
+                       cmp = ntohl((__force __be32)val);
+
+               switch (cmp) {
+               case XTR_NOT_READY:
+                       break;
+               case XTR_ABORT:
+                       /* No accompanying data */
+                       abort_flag = true;
+                       eof_flag = true;
+                       break;
+               case XTR_EOF_0:
+               case XTR_EOF_1:
+               case XTR_EOF_2:
+               case XTR_EOF_3:
+                       /* This assumes STATUS_WORD_POS == 1, Status
+                        * just after last data
+                        */
+                       byte_cnt -= (4 - XTR_VALID_BYTES(val));
+                       eof_flag = true;
+                       break;
+               case XTR_PRUNED:
+                       /* But get the last 4 bytes as well */
+                       eof_flag = true;
+                       pruned_flag = true;
+                       fallthrough;
+               case XTR_ESCAPE:
+                       *rxbuf = spx5_rd(sparx5, QS_XTR_RD(grp));
+                       byte_cnt += 4;
+                       rxbuf++;
+                       break;
+               default:
+                       *rxbuf = val;
+                       byte_cnt += 4;
+                       rxbuf++;
+               }
+       }
+
+       if (abort_flag || pruned_flag || !eof_flag) {
+               netdev_err(netdev, "Discarded frame: abort:%d pruned:%d 
eof:%d\n",
+                          abort_flag, pruned_flag, eof_flag);
+               kfree_skb(skb);
+               return;
+       }
+
+       if (!netif_oper_up(netdev)) {
+               netdev_err(netdev, "Discarded frame: Interface not up\n");
+               kfree_skb(skb);
+               return;
+       }
+
+       /* Finish up skb */
+       skb_put(skb, byte_cnt - ETH_FCS_LEN);
+       eth_skb_pad(skb);
+       skb->protocol = eth_type_trans(skb, netdev);
+       netif_rx(skb);
+       netdev->stats.rx_bytes += skb->len;
+       netdev->stats.rx_packets++;
+}
+
+static int sparx5_inject(struct sparx5 *sparx5,
+                        u32 *ifh,
+                        struct sk_buff *skb)
+{
+       u32 val, w, count;
+       int grp = INJ_QUEUE;
+       u8 *buf;
+
+       val = spx5_rd(sparx5, QS_INJ_STATUS);
+       if (!(QS_INJ_STATUS_FIFO_RDY_GET(val) & BIT(grp))) {
+               pr_err("Injection: Queue not ready: 0x%lx\n",
+                      QS_INJ_STATUS_FIFO_RDY_GET(val));
+               return -1;
+       }
+
+       if (QS_INJ_STATUS_WMARK_REACHED_GET(val) & BIT(grp)) {
+               pr_err("Injection: Watermark reached: 0x%lx\n",
+                      QS_INJ_STATUS_WMARK_REACHED_GET(val));
+               return -1;
+       }
+
+       /* Indicate SOF */
+       spx5_wr(QS_INJ_CTRL_SOF_SET(1) |
+               QS_INJ_CTRL_GAP_SIZE_SET(1),
+               sparx5, QS_INJ_CTRL(grp));
+
+       // Write the IFH to the chip.
+       for (w = 0; w < IFH_LEN; w++)
+               spx5_wr(ifh[w], sparx5, QS_INJ_WR(grp));
+
+       /* Write words, round up */
+       count = ((skb->len + 3) / 4);
+       buf = skb->data;
+       for (w = 0; w < count; w++, buf += 4) {
+               val = get_unaligned((const u32 *)buf);
+               spx5_wr(val, sparx5, QS_INJ_WR(grp));
+       }
+
+       /* Add padding */
+       while (w < (60 / 4)) {
+               spx5_wr(0, sparx5, QS_INJ_WR(grp));
+               w++;
+       }
+
+       /* Indicate EOF and valid bytes in last word */
+       spx5_wr(QS_INJ_CTRL_GAP_SIZE_SET(1) |
+               QS_INJ_CTRL_VLD_BYTES_SET(skb->len < 60 ? 0 : skb->len % 4) |
+               QS_INJ_CTRL_EOF_SET(1),
+               sparx5, QS_INJ_CTRL(grp));
+
+       /* Add dummy CRC */
+       spx5_wr(0, sparx5, QS_INJ_WR(grp));
+       w++;
+
+       return NETDEV_TX_OK;
+}
+
+int sparx5_port_xmit_impl(struct sk_buff *skb, struct net_device *dev)
+{
+       struct sparx5_port *port = netdev_priv(dev);
+       struct sparx5 *sparx5 = port->sparx5;
+       struct net_device_stats *stats = &dev->stats;
+       int ret;
+
+       ret = sparx5_inject(sparx5, port->ifh, skb);
+
+       if (ret == NETDEV_TX_OK) {
+               stats->tx_bytes += skb->len;
+               stats->tx_packets++;
+       } else {
+               stats->tx_dropped++;
+       }
+
+       dev_kfree_skb_any(skb);
+
+       return ret;
+}
+
+void sparx5_manual_injection_mode(struct sparx5 *sparx5)
+{
+       const int byte_swap = 1;
+       int portno;
+
+       /* Change mode to manual extraction and injection */
+       spx5_wr(QS_XTR_GRP_CFG_MODE_SET(1) |
+               QS_XTR_GRP_CFG_STATUS_WORD_POS_SET(1) |
+               QS_XTR_GRP_CFG_BYTE_SWAP_SET(byte_swap),
+               sparx5, QS_XTR_GRP_CFG(XTR_QUEUE));
+       spx5_wr(QS_INJ_GRP_CFG_MODE_SET(1) |
+               QS_INJ_GRP_CFG_BYTE_SWAP_SET(byte_swap),
+               sparx5, QS_INJ_GRP_CFG(INJ_QUEUE));
+
+       /* CPU ports capture setup */
+       for (portno = SPX5_PORT_CPU_0; portno <= SPX5_PORT_CPU_1; portno++) {
+               /* ASM CPU port: No preamble, IFH, enable padding */
+               spx5_wr(ASM_PORT_CFG_PAD_ENA_SET(1) |
+                       ASM_PORT_CFG_NO_PREAMBLE_ENA_SET(1) |
+                       ASM_PORT_CFG_INJ_FORMAT_CFG_SET(1), /* 1 = IFH */
+                       sparx5, ASM_PORT_CFG(portno));
+       }
+
+       /* Reset WM cnt to unclog queued frames */
+       for (portno = SPX5_PORT_CPU_0; portno <= SPX5_PORT_CPU_1; portno++)
+               spx5_rmw(DSM_DEV_TX_STOP_WM_CFG_DEV_TX_CNT_CLR_SET(1),
+                        DSM_DEV_TX_STOP_WM_CFG_DEV_TX_CNT_CLR,
+                        sparx5,
+                        DSM_DEV_TX_STOP_WM_CFG(portno));
+}
+
+irqreturn_t sparx5_xtr_handler(int irq, void *_sparx5)
+{
+       struct sparx5 *sparx5 = _sparx5;
+
+       /* Check data in queue */
+       while (spx5_rd(sparx5, QS_XTR_DATA_PRESENT) & BIT(XTR_QUEUE))
+               sparx5_xtr_grp(sparx5, XTR_QUEUE, false);
+
+       return IRQ_HANDLED;
+}
diff --git a/drivers/net/ethernet/microchip/sparx5/sparx5_phylink.c 
b/drivers/net/ethernet/microchip/sparx5/sparx5_phylink.c
new file mode 100644
index 000000000000..8166bdedaea1
--- /dev/null
+++ b/drivers/net/ethernet/microchip/sparx5/sparx5_phylink.c
@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: GPL-2.0+
+/* Microchip Sparx5 Switch driver
+ *
+ * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
+ */
+
+#include <linux/module.h>
+#include <linux/phylink.h>
+#include <linux/device.h>
+#include <linux/netdevice.h>
+#include <linux/sfp.h>
+
+#include "sparx5_main.h"
+
+static void sparx5_phylink_validate(struct phylink_config *config,
+                                   unsigned long *supported,
+                                   struct phylink_link_state *state)
+{
+       struct sparx5_port *port = netdev_priv(to_net_dev(config->dev));
+       __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
+
+       phylink_set(mask, Autoneg);
+       phylink_set_port_modes(mask);
+       phylink_set(mask, Pause);
+       phylink_set(mask, Asym_Pause);
+
+       switch (state->interface) {
+       case PHY_INTERFACE_MODE_10GBASER:
+       case PHY_INTERFACE_MODE_NA:
+               if (port->conf.max_speed == SPEED_25000 ||
+                   port->conf.max_speed == SPEED_10000) {
+                       phylink_set(mask, 5000baseT_Full);
+                       phylink_set(mask, 10000baseT_Full);
+                       phylink_set(mask, 10000baseCR_Full);
+                       phylink_set(mask, 10000baseSR_Full);
+                       phylink_set(mask, 10000baseLR_Full);
+                       phylink_set(mask, 10000baseLRM_Full);
+                       phylink_set(mask, 10000baseER_Full);
+               }
+               if (port->conf.max_speed == SPEED_25000) {
+                       phylink_set(mask, 25000baseCR_Full);
+                       phylink_set(mask, 25000baseSR_Full);
+               }
+               if (state->interface != PHY_INTERFACE_MODE_NA)
+                       break;
+               fallthrough;
+       case PHY_INTERFACE_MODE_SGMII:
+       case PHY_INTERFACE_MODE_QSGMII:
+               phylink_set(mask, 10baseT_Half);
+               phylink_set(mask, 10baseT_Full);
+               phylink_set(mask, 100baseT_Half);
+               phylink_set(mask, 100baseT_Full);
+               phylink_set(mask, 1000baseT_Full);
+               phylink_set(mask, 1000baseX_Full);
+               if (state->interface != PHY_INTERFACE_MODE_NA)
+                       break;
+               fallthrough;
+       case PHY_INTERFACE_MODE_1000BASEX:
+       case PHY_INTERFACE_MODE_2500BASEX:
+               if (state->interface != PHY_INTERFACE_MODE_2500BASEX) {
+                       phylink_set(mask, 1000baseT_Full);
+                       phylink_set(mask, 1000baseX_Full);
+               }
+               if (state->interface == PHY_INTERFACE_MODE_2500BASEX ||
+                   state->interface == PHY_INTERFACE_MODE_NA) {
+                       phylink_set(mask, 2500baseT_Full);
+                       phylink_set(mask, 2500baseX_Full);
+               }
+               break;
+       default:
+               bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
+               return;
+       }
+       bitmap_and(supported, supported, mask, __ETHTOOL_LINK_MODE_MASK_NBITS);
+       bitmap_and(state->advertising, state->advertising, mask,
+                  __ETHTOOL_LINK_MODE_MASK_NBITS);
+}
+
+static bool port_conf_has_changed(struct sparx5_port_config *a, struct 
sparx5_port_config *b)
+{
+       if (a->speed != b->speed ||
+           a->portmode != b->portmode ||
+           a->media_type != b->media_type)
+               return true;
+       return false;
+}
+
+static void sparx5_phylink_mac_config(struct phylink_config *config,
+                                     unsigned int mode,
+                                     const struct phylink_link_state *state)
+{
+       struct sparx5_port *port = netdev_priv(to_net_dev(config->dev));
+       struct sparx5_port_config conf;
+
+       conf = port->conf;
+       conf.power_down = false;
+       conf.portmode = state->interface;
+       conf.speed = state->speed;
+       conf.autoneg = state->an_enabled;
+
+       if (state->interface == PHY_INTERFACE_MODE_10GBASER) {
+               if (state->speed == SPEED_UNKNOWN) {
+                       /* When a SFP is plugged in we use capabilities to
+                        * default to the highest supported speed
+                        */
+                       if (phylink_test(state->advertising, 25000baseSR_Full) 
||
+                           phylink_test(state->advertising, 25000baseCR_Full))
+                               conf.speed = SPEED_25000;
+                       else if (state->interface == 
PHY_INTERFACE_MODE_10GBASER)
+                               conf.speed = SPEED_10000;
+               } else if (state->speed == SPEED_2500) {
+                       conf.portmode = PHY_INTERFACE_MODE_2500BASEX;
+               } else if (state->speed == SPEED_1000) {
+                       conf.portmode = PHY_INTERFACE_MODE_1000BASEX;
+               }
+       }
+
+       if (state->interface == PHY_INTERFACE_MODE_10GBASER) {
+               if (phylink_test(state->advertising, FIBRE))
+                       conf.media_type = ETH_MEDIA_SR;
+               else
+                       conf.media_type = ETH_MEDIA_DAC;
+       }
+
+       if (!port_conf_has_changed(&port->conf, &conf))
+               return;
+}
+
+static void sparx5_phylink_mac_link_up(struct phylink_config *config,
+                                      struct phy_device *phy,
+                                      unsigned int mode,
+                                      phy_interface_t interface,
+                                      int speed, int duplex,
+                                      bool tx_pause, bool rx_pause)
+{
+       /* Currently not used */
+}
+
+static void sparx5_phylink_mac_link_state(struct phylink_config *config,
+                                         struct phylink_link_state *state)
+{
+       state->link = true;
+       state->an_complete = true;
+       state->speed = SPEED_1000;
+       state->duplex = true;
+       state->pause = MLO_PAUSE_AN;
+}
+
+static void sparx5_phylink_mac_aneg_restart(struct phylink_config *config)
+{
+       /* Currently not used */
+}
+
+static void sparx5_phylink_mac_link_down(struct phylink_config *config,
+                                        unsigned int mode,
+                                        phy_interface_t interface)
+{
+       /* Currently not used */
+}
+
+const struct phylink_mac_ops sparx5_phylink_mac_ops = {
+       .validate = sparx5_phylink_validate,
+       .mac_pcs_get_state = sparx5_phylink_mac_link_state,
+       .mac_config = sparx5_phylink_mac_config,
+       .mac_an_restart = sparx5_phylink_mac_aneg_restart,
+       .mac_link_down = sparx5_phylink_mac_link_down,
+       .mac_link_up = sparx5_phylink_mac_link_up,
+};
-- 
2.29.2

Reply via email to